40CrMoVH
2024-01-31 17:17:14 Origin： Remark：0 Click：
IS 1570-5 Material Specification Refractory Steel 40CrMoVH Round bar, flat bar, plate and forgings Instock 40CrMoVH Heat treatment, Rough turned
MATERIAL TECHNICAL DATASHEET - Grade 40CrMoVH
Official Test Report: issued by TUV - SGS - BV
Special Melting Practice - BEF + AOD / + ESR
HS Code For Customs - 72285000 / 7228600
Available stock on hand - Round bar Diam. 50 ~ 170mm
Material Specifications - refractory Steel IS 1570-5 (1985 / 2004)
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.36 ~ 0.44
Silicon, Si (％): 0.15 ~ 0.35
Manganese, Mn (％): 0.45 ~ 0.85
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 0.90 ~ 1.20
Nickel, Ni (％): -
Molybdenum, Mo (％): 0.55 ~ 0.75
Vanadium, V (%): 0.25 ~ 0.35
Official Test Report: issued by TUV - SGS - BV
Special Melting Practice - BEF + AOD / + ESR
HS Code For Customs - 72285000 / 7228600
Available stock on hand - Round bar Diam. 50 ~ 170mm
Material Specifications - refractory Steel IS 1570-5 (1985 / 2004)
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.36 ~ 0.44
Silicon, Si (％): 0.15 ~ 0.35
Manganese, Mn (％): 0.45 ~ 0.85
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 0.90 ~ 1.20
Nickel, Ni (％): -
Molybdenum, Mo (％): 0.55 ~ 0.75
Vanadium, V (%): 0.25 ~ 0.35
MECHANICAL PROPERTY AT ROOM TEMPERATURE
Forms: Round bar, flat bar, forgings and plate
Quenching temp: 860 ℃, water or oil cooling, tempering 620℃, air cooling.
Tensile strength, σb/≥ MPa: 850
Yield strength, σ0.2/MPa: 700
Elongation, δ ≥(％): 14.0
Reduction of area, ф ≥ (％): -
Hardness via annealing /HBW: 269
Forms: Round bar, flat bar, forgings and plate
Quenching temp: 860 ℃, water or oil cooling, tempering 620℃, air cooling.
Tensile strength, σb/≥ MPa: 850
Yield strength, σ0.2/MPa: 700
Elongation, δ ≥(％): 14.0
Reduction of area, ф ≥ (％): -
Hardness via annealing /HBW: 269
PRODUCT DESCRIPTION
The alloy is usually produced by EAF +LF + VD followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
The alloy is usually produced by EAF +LF + VD followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
PROFILE & DIMENSIONS & SERVICE
Round bar & Disc (diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 610mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T10 ~ 400mm X W70 ~ 1000mm X Lmm
Sheet steel via cold rolled: T0.5 - 6mm X W60 ~ 1000mm X Lmm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 1000mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Round bar & Disc (diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 610mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T10 ~ 400mm X W70 ~ 1000mm X Lmm
Sheet steel via cold rolled: T0.5 - 6mm X W60 ~ 1000mm X Lmm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 1000mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
We closely cooperate with the professional inspection partners to strictly control the quality and improve the quality manage system, and guarantee the goods delivery each time. It is proved that we are worth of trusting and will be the strategic partner of the supplying chains in the special steels field.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：40CrMoVH
Previous page：XT80W13Co10Cr4V2
Last page：最后一页
Total list
Monthly rank
- 8524CrMo5
- 67ASTM A739 Gr. B11
- 6338NCD4
- 5638B3
- 511.6772
- 49815M17
- 47XC38
- 46EN52 & EN 52
- 4616CrMo4
- 43Grade C20
