25Cr2MoVH
2024-02-09 16:42:02 Origin: Remark:0 Click:
IS 1570-5 Material Specification Refractory Steel 25Cr2MoVH Round bar, flat bar, plate and forgings Stock Available 25Cr2MoVH Heat treatment, Cold machining
MATERIAL TECHNICAL DATASHEET - Grade 25Cr2MoVH
Official Test Report: issued by TUV - SGS - BV
Special Melting Practice - BEF + AOD / + ESR
HS Code For Customs - 72285000 / 7228600 / 72284000
Stock Available - Round bar Diam. 30 ~ 150mm
Material Specifications - refractory Steel IS 1570-5 (1985 / 2004)
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (%): 0.20 ~ 0.30
Silicon, Si (%): 0.25 ~ 0.50
Manganese, Mn (%): 0.30 ~ 0.60
Phosphorus, P (%) ≤: 0.030
Sulfur, S (%) ≤: 0.025
Chromium, Cr (%): 1.50 ~ 1.80
Nickel, Ni (%): ≤ 0.40
Molybdenum, Mo (%): 0.90 ~ 1.20
Vanadium, V (%): 0.20 ~ 0.30
Copper, Cu (%): ≤ 0.30
Ferrum, Fe (%): Balance
Official Test Report: issued by TUV - SGS - BV
Special Melting Practice - BEF + AOD / + ESR
HS Code For Customs - 72285000 / 7228600 / 72284000
Stock Available - Round bar Diam. 30 ~ 150mm
Material Specifications - refractory Steel IS 1570-5 (1985 / 2004)
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (%): 0.20 ~ 0.30
Silicon, Si (%): 0.25 ~ 0.50
Manganese, Mn (%): 0.30 ~ 0.60
Phosphorus, P (%) ≤: 0.030
Sulfur, S (%) ≤: 0.025
Chromium, Cr (%): 1.50 ~ 1.80
Nickel, Ni (%): ≤ 0.40
Molybdenum, Mo (%): 0.90 ~ 1.20
Vanadium, V (%): 0.20 ~ 0.30
Copper, Cu (%): ≤ 0.30
Ferrum, Fe (%): Balance
MECHANICAL PROPERTY AT ROOM TEMPERATURE
Forms: Round bar, flat bar, forgings and plate
Quenching temp: 1040 ℃, air cooling, tempering 700℃, air cooling.
Tensile strength, σb/≥ MPa: 730
Yield strength, σ0.2/MPa: 590
Elongation, δ ≥(%): 14.0
Reduction of area, ф ≥ (%): 55.0
Hardness via annealing /HBW: 241 max.
Forms: Round bar, flat bar, forgings and plate
Quenching temp: 1040 ℃, air cooling, tempering 700℃, air cooling.
Tensile strength, σb/≥ MPa: 730
Yield strength, σ0.2/MPa: 590
Elongation, δ ≥(%): 14.0
Reduction of area, ф ≥ (%): 55.0
Hardness via annealing /HBW: 241 max.
PRODUCT DESCRIPTION
The alloy is usually produced by EAF +LF + VD followed by electroslag refining (ESR) / VAR if necessary for special purpose.Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered.
The alloy is usually produced by EAF +LF + VD followed by electroslag refining (ESR) / VAR if necessary for special purpose.Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered.
PROFILE & DIMENSIONS & SERVICE
Round bar & Disc (diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 610mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T10 ~ 400mm X W70 ~ 1000mm X Lmm
Sheet steel via cold rolled: T0.5 - 6mm X W60 ~ 1000mm X Lmm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 1000mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Round bar & Disc (diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 610mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T10 ~ 400mm X W70 ~ 1000mm X Lmm
Sheet steel via cold rolled: T0.5 - 6mm X W60 ~ 1000mm X Lmm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 1000mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
We closely cooperate with the professional inspection partners to strictly control the quality and improve the quality manage system, and guarantee the goods delivery each time. It is proved that we are worth of trusting and will be the strategic partner of the supplying chains in the special steels field.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search:25Cr2MoVH
Previous page:AMS 5731
Last page:XT90W6Co5Mo5Cr4V2
Total list
Monthly rank
- 3624CrMo5
- 3338NCD4
- 33EN 14B
- 3342Cr4Mo2
- 28EN33 / EN 33
- 27ASTM A739 type B11
- 22EN 38
- 22XC38
- 2231Ni10Cr3Mo6
- 2226NiCrMoV11-5