15CrA Stockist, 15CrA Equivalent Steel

15CrA
2024-05-24 08:28:35   Origin:   Remark:0 Click:

GJB 1951-94 Material Specification for Quality Structure Steel Bars for Aviation 15CrA Stock Available Round bar, Flat bar 15CrA Forgings
 
MATERIAL STANDARD DATASHEET - GJB 15CrA

MATERIAL CATEGORY - Sp
ecification for Quality Structure
Steel Bars for Aviation.

PRODUCT DESCRIPTION
The 
alloy is usually produced by EAF + VD + LF / BEF / VIM followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - Quenched and tempered. 

MATERIAL SPECIFICATIONS - GJB 1951 - 94

MAIN CHEMICAL COMPOSITION (mass weight - %)      
Carbon, C (%): 0.12 ~ 0.17
Manganese, Mn (%): 0.30 ~ 0.60
Silicon, Si (%): 0.17 ~ 0.37
Phosphorus, P (%) ≤: 0.025
Sulfur, S (%) ≤: 0.015
Chromium, Cr (%): 0.70 ~ 1.00
Nickel, Ni (%):   0.40
Molybdenum, Mo (%): ≤ 0.15
Vanadium, V (%): -
Tungsten, W (%): -
Ferrum, Fe (%): remainder.

MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT
Heat treatment temperature /℃| annealing: -.
Heat treatment temperature /℃| Normalizing:  -
Heat treatment temperature /℃| Quenching:  780 ~ 810 oil
Heat treatment temperature /℃| Tempering : 150 ~ 170 air
Hardness after annealing, ≤ HBW:  179
Tensile strength, Rm ≥ MPa: 590
Yield strength, Rp0.2 ≥ MPa: 390
Elongation, A ≥ (%): 15.0
Reduction of area, Z ≥ (%): 50.0
Impact strength, AKu ≥ J: 71
Hardness after final heat treatment / HBW:  170 ~ 302

PRODUCT PROFILE & DIMENSIONS
Round bar & Disc (diameter): 5.5mm to 700mm
Square bar / Flat bar: 8mm to 650mm
Length: Fixed length or random length or based on the customer's special requirements.
Plate & Sheet steel: T2.0 ~ 300mm X W10 ~ 1500mm X Lmm


TYPICAL APPLICATIONS
Alloy structural 
steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on. 
Mechanical parts - connecting rod, bolt and nuts.
Multidiameter shaft, Pressure vessel parts.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod

TECHNICAL SALES ASSISTANCE & SERVICE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special 
material is welcome.
 
If you meet further on any technical enquiry, pleased to E-mail ( sales@ccsteels.com.) or call our resident team of qualified production engineers.

Hot search:

Previous page:Marinox 17
Last page:最后一页

Share to: