SNB23-5 Stockist, SNB23-5 Equivalent Steel

SNB23-5
2024-07-05 14:32:59   Origin:   Remark:0 Click:

JIS G4108 Technical specifications of Bolting materials for high temperature service SNB23-5 Round bar, Flat bar SNB23-5 Stock available, Heat treatment
 

MATERIAL DATA SHEET - JIS SNB23-5

MATERIAL CATEGORY: Alloy steel bolting materials for high temperature service  
MATERIAL SPECIFICATIONS: JIS G4108 -2007
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS -  BV
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (%): 0.37 ~ 0.44
Silicon, Si (%): 0.20 ~ 0.35
Manganese, Mn (%): 0.60 ~  0.95
Phosphorus, P (%) ≤: 0.025
Sulfur, S (%) ≤: 0.025
Chromium, Cr (%): 0.65 ~ 0.95
Nickel, Ni (%): 1.55 ~ 2.00
Molybdenum, Mo (%): 0.20 ~ 0.30
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Diam.: 150mm Max.
Tensile strength, Rm ≥ MPa: 820
Yield strength, Rp0.2 ≥ MPa: 718
Elongation, A5 ≥ (%): 15.0
Reduction of area, Z ≥ (%): 50.0
Hardness | HBW ≤: 248 ~ 311
Diam.: 150mm ~ 200mm
Tensile strength, Rm ≥ MPa: 790
Yield strength, Rp0.2 ≥ MPa: 685
Elongation, A5 ≥ (%): 15.0
Reduction of area, Z ≥ (%): 50.0
Hardness | HBW ≤: 255 ~ 321
MELTING PROCESS AND FEATURES
The 
steels shall be manufactured by melting process EF + ESR, EAF+ LF + VD, ESR Melted or by agreement.
Spring steel should possess excellent combination property, such as mechanical property (limit of elasticity, ultimate strength, yield ratio), relaxation resistant, fatigue property, hardenability, physical and chemical property (heat resistance,low temperature resistant, antioxidation, corrosion resistance). To meet the above performance requirement, Spring steel has fine metallurgical quality ( high purity, homogeneity), excellent surface quality ( specially on surface defect and decarbur-ization), precise external form and dimensions.
PRODUCT PROFILE & DIMENSION
Round bar & Disc (diameter): 5.50mm to 800mm
Square bar / Flat bar (Width X Thickness): 10mm to 600mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 200mm X Coil
Steel sheet / plate: T0.50 ~ 50mm X W10 ~ 1200mm X random length or in coil form.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com.) our resident team of qualified production engineers.

Hot search:

Previous page:15Cr2MnNi2TiA
Last page:最后一页

Share to: