B649 Gr.N08926
2017-04-28 08:08:51 Origin： Remark：0 Click：
Technical specifications of ASTM B649-2006 Ni-Fe-Cr-Mo-Cu-N alloy N08926 datasheet, Gr.N08926 Chemical compositions, N08926 mechanical properties from Steelmaking, ESR melted, Blooming, Forging, Hot rolling, Heat treatment, Straightening, Ultrasonic test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - ASTM B649 Grade UNS N08926
TECHNICAL SPECIFICATION: ASTM B649-2006
MATERIAL CATEGORY: Ni-Fe-Cr-Mo-Cu-N Alloy
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.020
C (％): ≤ 0.020
Si (％): ≤ 0.50
Mn (％): ≤ 2.00
P (％) ≤: 0.030
S (％) ≤: 0.010
Cr (％): 19.0 ~ 21.0
Ni (％): 24.0 ~ 26.0
Mo (％): 6.00 ~ 7.00
Mn (％): ≤ 2.00
P (％) ≤: 0.030
S (％) ≤: 0.010
Cr (％): 19.0 ~ 21.0
Ni (％): 24.0 ~ 26.0
Mo (％): 6.00 ~ 7.00
Cu (%): 0.50 ~ 1.50
N (%): 0.15 ~ 0.25
Fe (%): Balance
MECHANICAL PROPERTIES
Condition: annealed
Tensile strength, σb/≥ MPa: 650
MECHANICAL PROPERTIES
Condition: annealed
Tensile strength, σb/≥ MPa: 650
Yield strength, σ0.2/≥ MPa: 295
Elonghation, δ ≥(％): 35.0
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged or double aged
FORMS AND SHAPES
Round bar (Diameter): 0.20mm to 650mm
Square bar / Flat bar: 3mm to 500mm
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged or double aged
FORMS AND SHAPES
Round bar (Diameter): 0.20mm to 650mm
Square bar / Flat bar: 3mm to 500mm
Steel wire: Diam.0.10 ~ 4.0mm, in coil form
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: lh.steel@hotmail.com
Total list
Monthly rank
- 50FSX-414
- 16Aquamet 22
- 1510705BU
- 15AMS 5221
- 13Carpenter 20 Mo 4
- 12X12CrNiMoV12-2
- 11Inconel 610
- 10AMS 5354
- 9Incoloy 840
- 8Aquamet 17
