1.4939
2026-05-07 13:00:00 Origin： Remark：0 Click：
Creep resistant steel 1.4939 is high temperature high strength alloy, 1.4939 used to produce the high temperature components for gas turbine in the field of aviation
TECHNICAL DATA SHEET - DIN 1.4939
Material category: hight temperature, high tensile steel & superalloy
Product description
1.4939 is usually produced by EF + VD followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the solution annealing condition.
Final heat treatment - QT / solution treatment.
Technical specifications: DIN 17742, 17460, 17480, DIN EN 10302, 10296, 10095.
Stock & inventory: diam. 40 ~ 210 mm, ESR ingot, billets.
Typical chemical compositions (mass fraction %)
Carbon, C (％): 0.08 ~ 0.15
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): 0.40～0.90
Phosphorus, P (％): ≤ 0.025
Sulfur, S (％): ≤ 0.015
Chromium, Cr (％): 11.0～12.5
Nickel, Ni (％): 2.00～3.00
Molybdenum, Mo (％): 1.50～2.00
Vanadium, V (％): 0.25 ~ 0.40
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): 0.40～0.90
Phosphorus, P (％): ≤ 0.025
Sulfur, S (％): ≤ 0.015
Chromium, Cr (％): 11.0～12.5
Nickel, Ni (％): 2.00～3.00
Molybdenum, Mo (％): 1.50～2.00
Vanadium, V (％): 0.25 ~ 0.40
Nitrogen, N (%): 0.02 ~ 0.04
MECHANICAL PROPERTIES - HEAT TREATMENT AND HARDNESS
Hot forming temperature /℃: 1150～800
Heat treatment temperature /℃ | annealing: 660~690
Heat treatment temperature /℃ | quenching or solution: 1050±15 oil
Heat treatment temperature /℃ | tempering: 640 ~ 690
Heat treatment temperature /℃ | ageing: 590 ~ 640
Condition: heat treatment
Mechanical property under room temperature | Rm / MPa: 950 ~ 1150
Mechanical property under room temperature | Rp0.2 ≥ MPa: 800
Mechanical property under room temperature | A5 ≥ (％): 13
Mechanical property under room temperature | Akv (DVM): 55
Heat stability temperature/℃: 580
Non-scale temperature in air /℃: 600.
PROFILES & DIMENSIONS
Rod / round bar / disc (diameter): 6.0 to 900 mm
Square bar / flat bar: 10 to 600 mm
Plate / Sheet steel / strip: thickness 0.5 to 5 mm
Width: 8 to 1000 mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts / other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, pleased to Email (sales@ccsteels.com) or call our resident team of qualified production engineers.
Hot search：1.4939
Previous page：1.4938
Last page：X6CrNiTiB18-10
