BioDur 316LS Stockist, BioDur 316LS Equivalent Steel
Home > Superalloy > Text

BioDur 316LS
2017-06-28 12:07:52   Origin:   Remark:0 Click:

Technical specifications of American high temperature alloys BioDur 316LS datasheet, BioDur 316LS Chemical compositions, Grade BioDur 316LS mechanical properties from Steelmaking, ESR melted, Blooming, Forging, Hot rolling, Heat treatment, Straightening, Ultrasonic test, Cold working or Machined. All of these materials conform to Military standard, nuclear power.100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
MATERIAL TECHNICAL DATA SHEET - Grade BioDur 316LS

OFFICIAL TEST CERTIFICATE: issued by TUV - SGS BV
MAIN FEATURES: BioDur 316LS stainless has found application in fracture fixation devices such as bone plates, screws, and intramedullary nails. This alloy has been used as machining and forging stock for producing surgical implant devices. The alloy has also been used in surgical instruments where high hardness is not a requirement.
MATERIAL CATEGORY: American high temperature alloy and other special alloys
CHEMICAL COMPOSITION (WEIGHT %)
C (%):     ≤ 0.030
Si (%):    ≤ 0.75
Mn (%):   ≤ 2.00 
P (%)≤:   0.025
S (%)≤:   0.010
Cr (%):    17.0 ~ 19.0
Ni (%):    13.0 ~ 15.0
Mo (%):   2.25 ~ 3.50
Co (%):    -
W (%):    -
Al (%):     -
Cu (%):   ≤ 0.50
Ti (%):    -
N (%):     ≤ 0.10
Fe (%):    Remainder
MECHANICAL PROPERTIES
Tensile strength, σb/≥ MPa: 586
Yield strength, σ0.2/≥ MPa: 434
Elonghation, δ ≥(%): 57.0
Reduction of area, ф ≥ (%): -
Hardness | HB: -
TYPICAL APPLICATIONS
Superalloy is widely used to produce the high temperature components for gas turbine in the field of aviation, naval vessels and industry, such as turbine blade, guide blade, turbine disc, high pressure compressor disc, combustor, and also production of energy conversion devices, such as aerospace craft, rocket motor, nuclear reactor, petrochemical equipments, coaly transforming and so on. The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged
FORMS AND SHAPES
Round bar (Diameter): 0.20mm to 800mm
Square bar / Flat bar: 3mm to 500mm

Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: Different shapes based on OEM.

TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers. - Email:
lh.steel@hotmail.com
You also can reach our sales dept via E-mail: sales@ccsteels.com

Hot search:BioDur 316LS

Previous page:Z12CNDV12-03
Last page:Z13C13

Share to: