Carpenter 20Cb-3 Mod
2017-07-03 10:51:03 Origin： Remark：0 Click：
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
C (％): ≤ 0.035
Si (％): ≤ 0.30
Mn (％): 1.50 ~ 2.50
P (％)≤: 0.020
S (％)≤: 0.015
Cr (％): 19.0 ~ 21.0
Mo (％): 2.00 ~ 3.00
Co (%): -
Al (%): -
Cu (%): 3.00 ~ 4.00
Ti (%): -
Yield strength, σ0.2/≥ MPa: 241
Elonghation, δ ≥(％): 30.0
Reduction of area, ф ≥ (％): 50.0
Hardness | HB: -
Superalloy is widely used to produce the high temperature components for gas turbine in the field of aviation, naval vessels and industry, such as turbine blade, guide blade, turbine disc, high pressure compressor disc, combustor, and also production of energy conversion devices, such as aerospace craft, rocket motor, nuclear reactor, petrochemical equipments, coaly transforming and so on. The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged
FORMS AND SHAPES
Round bar (Diameter): 0.20mm to 800mm
Square bar / Flat bar: 3mm to 500mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: Different shapes based on OEM.