Z18CWN 13
2021-04-01 15:56:54 Origin： Remark：0 Click：
Specifications Z18CWN 13 Datasheet, Z18CWN 13 Chemical, Z18CWN13 Properties forgings, Flat bar. Technical specifications - NF A35 - 578 From Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
MATERIAL SPECIFICATION & DATASHEET - Grade Z18CWN13
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY - Heat resistant steel series
EX-STOCK - Diameter 160mm, 205mm
MATERIAL CATEGORY - Heat resistant steel series
EX-STOCK - Diameter 160mm, 205mm
TECHNICAL STANDARDS - NF A35-578 - 1991
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.15 ~ 0.20
Si (％): ≤ 0.50
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.15 ~ 0.20
Si (％): ≤ 0.50
Mn (％): ≤ 0.50
P (％)≤: 0.035
S (％)≤: 0.015
Cr (％): 12.0 ~ 14.0
P (％)≤: 0.035
S (％)≤: 0.015
Cr (％): 12.0 ~ 14.0
Ni (％): 1.80 ~ 2.20
Mo (%): ≤ 0.50
W (%): 2.50 ~ 3.50
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Quenched 1000 Deg. C, oil / air cooled, and tempered 620 Deg. C min.
Tensile strength,σb/≥ MPa: 960
Yield strength, σ0.2/≥ MPa: 760
Elongation, δ ≥(％): 15.0
Yield strength, σ0.2/≥ MPa: 760
Elongation, δ ≥(％): 15.0
hardness / HBS: 300 ~ 355
PRODUCT DESCRIPTION
The alloy is usually produced by BEF / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - quenched and tempered
AVAILABLE FORMS & DIMENSIONS
The alloy is usually produced by BEF / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - quenched and tempered
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 to 550mm
Square bar / Flat bar: T3.0 to 500mm X W3.0 ~ 400mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T30 - 400mm X W70 - 1200mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 3mm X W10 - 400mm X L, or in coil form
Steel strip via cold rolled: T0.10 - 3mm X W5.0 - 600mm X L (or in coil form)
Square bar / Flat bar: T3.0 to 500mm X W3.0 ~ 400mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T30 - 400mm X W70 - 1200mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 3mm X W10 - 400mm X L, or in coil form
Steel strip via cold rolled: T0.10 - 3mm X W5.0 - 600mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, you can reach or EMAIL our qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry, you can reach or EMAIL our qualified production engineers, Email: sales@ccsteels.com
Previous page：Z12CNDV12-03
Last page：AMS 5552
