NCF800
2021-08-02 09:47:14 Origin: Remark:0 Click:
Specifications NCF800 Datasheet, Inventory NCF800 Chemical, Suppliers NCF800 Property from Technical specifications - KS D3531 - 2003. From Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATASHEET - Grade NCF800
Technical Specifications - KS D3531 - 1992/2003
Official Test Certificate - issued by TUV - SGS - BV
Material Category - Heat resistant stainless steel & Superalloy
Chemical Composition ( Mass Weight % )
C (%): ≤ 0.10
Si (%): ≤ 1.00
Mn (%): ≤ 1.50
P (%) ≤: 0.030
S (%) ≤: 0.015
Cr (%): 19.0 ~ 23.0
Ni (%): 30.0 ~ 35.0
Official Test Certificate - issued by TUV - SGS - BV
Material Category - Heat resistant stainless steel & Superalloy
Chemical Composition ( Mass Weight % )
C (%): ≤ 0.10
Si (%): ≤ 1.00
Mn (%): ≤ 1.50
P (%) ≤: 0.030
S (%) ≤: 0.015
Cr (%): 19.0 ~ 23.0
Ni (%): 30.0 ~ 35.0
Cu (%): ≤ 0.75
Al (%): 0.15 ~ 0.60
Ti (%): 0.15 ~ 0.60
Fe (%): Remainder
MECHANICAL PROPERTY UNDER ROOM TEMP.
Condition: Annealing, 980 ~ 1060 Deg. C min. rapid colling
Condition: Annealing, 980 ~ 1060 Deg. C min. rapid colling
Tensile strength, σb/ ≥ MPa: 520
Yield strength, σ0.2/ ≥ MPa: 205
Elongation, δ (%) ≥: 30.0
Reduction of area, ф (%) ≥: -
Hardness under solution anneal ≤ (HBW): 179 Max.
Yield strength, σ0.2/ ≥ MPa: 205
Elongation, δ (%) ≥: 30.0
Reduction of area, ф (%) ≥: -
Hardness under solution anneal ≤ (HBW): 179 Max.
MELTING PROCESS
The alloy is usually produced by AOD / EAF / VIM, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 420mm
Wire rod (Diameter): 0.15 ~ 13mm
Flat bar (Thickness X Width): 4 ~ 300 X 15 ~ 610mm
Length: random length, fixed length or based on the customer's special requirement.
Form: wire or straightened bar
The alloy is usually produced by AOD / EAF / VIM, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 420mm
Wire rod (Diameter): 0.15 ~ 13mm
Flat bar (Thickness X Width): 4 ~ 300 X 15 ~ 610mm
Length: random length, fixed length or based on the customer's special requirement.
Form: wire or straightened bar
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
If you meet further on any technical inquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
Hot search:NCF800
Previous page:20NiCrMo14-5
Last page:EN 58G