AIR9160C Z100CD17
2017-02-13 10:14:36 Origin： Remark：0 Click：
Material standard specification of AIR9160/C type Z100CD17 datasheet,Grade Z100CD17 Chemical compositions,Grade Z100CD17 Mechanical properties from Steelmaking,ESR melted,Blooming, Hot forging, Hot rolling, Grade Z100CD17 Heat treatment, Straightening, 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3. Cold working, Polishing, Centerless grinding, Peeling or rough turned machining. Material technical specification AIR 9160/C - 1973.
TECHNICAL SPECIFICATION - AIR 9160C Grade Z100CD17
TECHNICAL SPECIFICATION: DGA - AIR 9160/C - 1973
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS
MATERIAL TYPE: high tensile steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.95 ~ 1.10
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％) ≤: 0.030
S (％) ≤: 0.020
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.95 ~ 1.10
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％) ≤: 0.030
S (％) ≤: 0.020
Cr (%): 16.0 ~ 18.0
Ni (%): ≤ 0.75
Mo (%): 0.35 ~ 0.75
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Annealed / Heat treated hardness | HB: 58HRC min.
Annealed / Heat treated hardness | HB: 58HRC min.
Quenching/Solution treated, 1050,+/-10 Deg, tempering 150, +/-5 Deg.
AVAILABLE FORMS AND SHAPES
Round bar (Diameter): 1.5 mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
AVAILABLE FORMS AND SHAPES
Round bar (Diameter): 1.5 mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
- Email: lh.steel@hotmail.com
Previous page：E-Z85WCDV6
Last page：AIR9160C 45SCD6
