AISI E52100
2016-06-29 15:25:14 Origin： Remark：0 Click：
Technical specification of AISI E52100 Round bar, Flat bar, and plate Hot forging,Hot rolling,Heat treatment, Straightening, 100% Ultrasonic test, Cold working.
MATERIAL TECHNICAL DATA SHEET - Grade AISI E52100
MATERIAL CATEGORY: SAE, AISI, UNS system alloy structural steel
MATERIAL SPECIFICATIONS: SAE J1249 -2000
MATERIAL CATEGORY: SAE, AISI, UNS system alloy structural steel
MATERIAL SPECIFICATIONS: SAE J1249 -2000
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (mass weight - % )
Carbon, C (％): 0.95 ~ 1.10
CHEMICAL COMPOSITION (mass weight - % )
Carbon, C (％): 0.95 ~ 1.10
Silicon, Si (%): 0.20 ~ 0.35
Manganese, Mn (％): 0.25 ~ 0.45
Manganese, Mn (％): 0.25 ~ 0.45
Phosphorus, P (％)≤: 0.025
Sulfur, S (％)≤: 0.025
Chromium, Cr (%): 1.30 ~ 1.60
Nickel, Ni (%): -
Molybdenum, Mo (%): -
MAIN FEATURES AND MELTING PROCESS
The steels shall be manufactured by melting process EAF, LF + VD, IFF + ESR Melted. VIM + ESR can be handled by agreement. Forgings may be furnished in one of the following conditions: stress relieving; annealing; solution treatment; solution treatment and ageing; normalizing; normalizing and tempering; or quenching and tempering.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners.
Mechanical gears, gear shaft, main axis, valve rods.
Mechanical parts - connecting rods, bolts and nuts.
Multidiameter shafts.
PROFILE AND SUPPLYING SIZES
Round bar & Disc (diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 400mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 500mm X Coil
Heavy/middle plate via hot rolled: T4 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts, other different shapes based on OEM requirement.
The steels shall be manufactured by melting process EAF, LF + VD, IFF + ESR Melted. VIM + ESR can be handled by agreement. Forgings may be furnished in one of the following conditions: stress relieving; annealing; solution treatment; solution treatment and ageing; normalizing; normalizing and tempering; or quenching and tempering.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners.
Mechanical gears, gear shaft, main axis, valve rods.
Mechanical parts - connecting rods, bolts and nuts.
Multidiameter shafts.
PROFILE AND SUPPLYING SIZES
Round bar & Disc (diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 400mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 500mm X Coil
Heavy/middle plate via hot rolled: T4 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts, other different shapes based on OEM requirement.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Previous page：UNS G51986
Last page：SAE 52100
