ASTM A387 grade 5
2026-01-26 12:45:00 Origin： Remark：0 Click：
Stock available ASTM A387 Grade 5 peeled round bar, flat bar, plate properties from Steel making, ESR melted, hot bloomed, forged, rolled, heat treated, 100% Ultrasonic test
TECHNICAL DATA SHEET - ASTM A387 Grade 5
Technical specifications: ASTM A387 - 2017
Material category: Cr5.0 - Mo0.55 base alloy steel
Typical chemical compositions (mass fraction %)
Carbon, C (％): ≤ 0.15
Typical chemical compositions (mass fraction %)
Carbon, C (％): ≤ 0.15
Manganese, Mn (％): 0.30 ~ 0.60
Silicon, Si (％): ≤ 0.50
Silicon, Si (％): ≤ 0.50
Phosphorus, P (％): ≤ 0.025
Sulfur, S (％): ≤ 0.025
Chromium, Cr (%): 4.00 ~ 6.00
Molybdenum, Mo (%): 0.45 ~ 0.65
Sulfur, S (％): ≤ 0.025
Chromium, Cr (%): 4.00 ~ 6.00
Molybdenum, Mo (%): 0.45 ~ 0.65
Nickel, Ni (%): -
Ferrum, Fe (%): balance.
TYPICAL MECHANICAL PROPERTIES
Tensile strength, Rm ≥ MPa: 415 ~ 585
Yield strength, Rp0.2 / MPa: 205
Elongation, A5 ≥ (％): 18.0
Reduction of area, Z ≥ (％): 45.0
Hardness via heat treatment / HBW: 255 max.
Reduction of area, Z ≥ (％): 45.0
Hardness via heat treatment / HBW: 255 max.
PRODUCT DESCRIPTION
The alloy is usually produced by BEF /EAF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / rod / disc (diameter): 6.0 to 910 mm
Square bar / flat bar: 10 to 600 mm
Length: random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Forging piece: stepped shafts, and other different shapes based on OEM.
The alloy is usually produced by BEF /EAF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / rod / disc (diameter): 6.0 to 910 mm
Square bar / flat bar: 10 to 600 mm
Length: random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Forging piece: stepped shafts, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers - Email: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers - Email: sales@ccsteels.com.
Previous page：ASTM A387 type 22L
Last page：S50200
Total list
Monthly rank
- 18S135
- 1611SMnPb30
- 15NF 20NC11
- 14EN35B
- 141.7380
- 14SCr435
- 13ASTM 1526/G15260
- 13635H15 / 635M15 / En351
- 131.7005
- 13AISI 8645H