16NC6
2020-02-11 15:23:49 Origin： Remark：0 Click：
NF EN 10084 of Case hardening steel 16NC6 Round bar, 16NC6 Shaft ESR melted, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or machined
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION - Grade 16NC6
MATERIAL TYPE: Case hardening steel
MATERIAL STANDARDS: NF EN 10084
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.14 ~ 0.20
Silicon, Si (％): ≤ 0.40
Manganese, Mn (％): 0.50 ~ 0.90
Phosphorus, P (％)≤: 0.035
Sulfur, S (％)≤: 0.035
Phosphorus, P (％)≤: 0.035
Sulfur, S (％)≤: 0.035
Chromium, Cr (%): 1.40 ~ 1.70
Nickel, Ni (%): 1.40 ~ 1.70
Molybdenum, Mo (%): -
Equals to SAE 3115
TYPICAL MECHANICAL PROPERTIES
Tensile strength σb≥/MPa: 900 ~ 1200
Yield strength σs≥/MPa: 715
Yield strength σs≥/MPa: 715
Elongation δ5 ≥(%): 13.0
Reduction of area ψ(％) ≥: -
PRODUCT PROFILE & DIMENSION
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W10 - 1000mm X L1000 - 5000mm
Forging piece: stepped shafts, other different shapes based on OEM.
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineer.
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineer.
Hot search：16NC6
Previous page：1.5026
Last page：STS630 H900
