H51600 datasheet,H51600 chemical,H51600 heat treatment

H51600
2021-03-09 08:39:16   Origin:   Remark:0 Click:

Specifications H51600 datasheet, H51600 Chemical, H51600 Properties from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
MATERIAL TECHNICAL DATA SHEET - H51600
MATERIAL CATEGORY - ASTM Hardenability requirement alloy structural steel
MATERIAL SPECIFICATIONS - ASTM A304 -2004
HS CODE - 72284000 / 72285000
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS BV
CHEMICAL COMPOSITION (WEIGHT %)
C (%):    0.55 ~ 0.65
Si (%):    0.15 ~ 0.35
Mn (%):  0.65 ~ 1.10
P (%)≤:  0.025
S (%)≤:  0.025
Cr (%):   0.60 ~ 1.00
Mo (%):  -
Ni (%):    - 
END-QUENCH (hardenability) TEST TEMPERATURE
Heat treatment temperature /normalizing: 870 ℃
Heat treatment temperature /quenching: 845 ℃
MAIN FEATURES AND MELTING PROCESS
The steels
shall be manufactured by melting process EF, LF + EAF+ VD, IFF + ESR Melted. VIM + ESR can be handled by agreement.
Forgings may be furnished in one of the following conditions: stress relieving; annealing; solution treatment; solution treatment and ageing; normalizing; normalizing and tempering; or quenching and tempering.
TYPICAL APPLICATIONS
Alloy
structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rods
Mechanical parts - connecting rods, bolts and nuts
Multidiameter shafts

PROFILE AND DIMENSIONS
Round bar (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 650mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 1000mm X Coil
Heavy/middle plate via hot rolled: T4 - 300mm X W70 - 1000mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM requirement.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com

Hot search:H51600

Previous page:AMS 6418
Last page:G86600

Share to: