SAE 3130 datasheet,SAE 3130 chemical,SAE 3130 heat treatment

SAE 3130
2021-07-17 10:01:12   Origin:   Remark:0 Click:

Specification SAE 3130 Datasheet, Stocklist SAE 3130 Chemical, Suppliers SAE 3130 Properties from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working, Peeled or rough turned machining. Technical specification ASTM SAE J1249 -2000. We also possess the advanced precision machining equipments for catering for your different special requirements.
TECHNICAL DATA SHEET - Grade SAE 3130

MATERIAL CATEGORY - SAE, AISI, UNS system alloy structural steel
MATERIAL SPECIFICATIONS - SAE J1249 -2000
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS -  BV
CHEMICAL COMPOSITION ( Mass Weight % )
C (%):    0.28 ~ 0.33
Si (%):    0.20 ~ 0.35
Mn (%):  0.60 ~ 0.80
P (%)≤:  0.040
S (%)≤:  0.040
Cr (%):   0.55 ~ 0.75
Ni (%):   1.10 ~ 1.40
Mo (%): -
MECHANICAL PROPERTIES AND HOT WORKING
Mechanical property ≥ σb/MPa:   830
Mechanical property ≥ σs/MPa:   685
Mechanical property ≥ δ5 (%):    10
Mechanical property ≥ ψ (%):     48
Hot working temperature /℃:      1100~850
MAIN FEATURES AND MELTING PROCESS
The
steels shall be manufactured by melting process EF, LF + EAF+ VD, IFF + ESR Melted. VIM + ESR can be handled by agreement.
Forgings may be furnished in one of the following conditions: stress relieving; annealing; solution treatment; solution treatment and ageing; normalizing; normalizing and tempering; or quenching and tempering.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rods
Mechanical parts - connecting rods, bolts and nuts
Multidiameter shafts

PROFILE AND SUPPLYING FORMS
Round bar (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Heavy/middle plate via hot rolled: T40 - 400mm X W50 - 1200mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.  
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email:
sales@ccsteels.com.

Hot search:SAE 3130

Previous page:EN 58D
Last page:最后一页

Share to: