12XH2
2026-05-25 07:37:15 Origin： Remark：0 Click：
ГОСT 4543 -1971 Chromium - Nickel steel round bar heat treated forgings 12XH2 plate stock available ESR ingot, hot bloomed, rolled, forged, cold drawn rod
TECHNICAL DATA SHEET - 12XH2
Material category: 0.75Cr - 1.7Ni - 0.12C base alloy steel
Technical standards: ГОСT 4543 -1971
Available from stock: round bar diam. 40 ~ 150 mm
Material category: 0.75Cr - 1.7Ni - 0.12C base alloy steel
Technical standards: ГОСT 4543 -1971
Available from stock: round bar diam. 40 ~ 150 mm
Typical chemical elements (mass fraction - %)
Carbon, C (％): 0.09 ~ 0.16
Silicon, Si (％): 0.17 ~ 0.37
Manganese, Mn (％): 0.30 ~ 0.60
Phosphorus, P (％) ≤: 0.035
Sulfur, S (％) ≤: 0.025
Chromium, Cr (％): 0.60 ~ 0.90
Nickel, Ni (%): 1.50 ~ 1.90
Molybdenum, Mo (％): -
Carbon, C (％): 0.09 ~ 0.16
Silicon, Si (％): 0.17 ~ 0.37
Manganese, Mn (％): 0.30 ~ 0.60
Phosphorus, P (％) ≤: 0.035
Sulfur, S (％) ≤: 0.025
Chromium, Cr (％): 0.60 ~ 0.90
Nickel, Ni (%): 1.50 ~ 1.90
Molybdenum, Mo (％): -
Ferrum, Fe (%): remainder.
MECHANICAL PROPERTIES - HEAT TREATMENT PRACTICE
Heat treatment temperature / ℃, annealing: -
Heat working temperature / ℃: 1200 ~ 850
Heat treatment temperature / ℃, quenching: 760 ~ 810, oil cooled
Heat treatment temperature / ℃, tempering: 180, oil / air cooled
Hardness under annealing condition ≤ HB: 219
Tensile strength, Rm ≥ MPa: 785
Yield strength, Rp0.2 ≥ MPa: 585
Elongation, A5 ≥ (%): 12.0
Reduction of area, Z ≥ (%): 50.0
Impact strength, AK ≥ J: 88
Hardness after final heat treatment / HB: -
MECHANICAL PROPERTIES - HEAT TREATMENT PRACTICE
Heat treatment temperature / ℃, annealing: -
Heat working temperature / ℃: 1200 ~ 850
Heat treatment temperature / ℃, quenching: 760 ~ 810, oil cooled
Heat treatment temperature / ℃, tempering: 180, oil / air cooled
Hardness under annealing condition ≤ HB: 219
Tensile strength, Rm ≥ MPa: 785
Yield strength, Rp0.2 ≥ MPa: 585
Elongation, A5 ≥ (%): 12.0
Reduction of area, Z ≥ (%): 50.0
Impact strength, AK ≥ J: 88
Hardness after final heat treatment / HB: -
PRODUCT DESCRIPTION
12XH2 is usually produced by EAF + VD + LF / BEF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - quenched and tempered.
Rod / round bar / disc (diameter): 6.0 ~ 800 mm
Square bar / flat bar: 10 ~ 500 mm
Plate / sheet via cold & hot rolled / forged: THK 0.5 ~ 200 X wide 15 ~ 1000 X L mm
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Steel bar and steel forgings for barrel of middle-small caliber quick firing arms.
Power generation, turbine fasteners, boiler support rods.
Process plant, fasteners, Mechanical gears, gear shaft, main axis, valve rod.
TECHNICAL SALES ASSISTANCE & SERVICE
20+ years focus on special steel manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
Final heat treatment - quenched and tempered.
Rod / round bar / disc (diameter): 6.0 ~ 800 mm
Square bar / flat bar: 10 ~ 500 mm
Plate / sheet via cold & hot rolled / forged: THK 0.5 ~ 200 X wide 15 ~ 1000 X L mm
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Steel bar and steel forgings for barrel of middle-small caliber quick firing arms.
Power generation, turbine fasteners, boiler support rods.
Process plant, fasteners, Mechanical gears, gear shaft, main axis, valve rod.
TECHNICAL SALES ASSISTANCE & SERVICE
20+ years focus on special steel manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
Raw material available from stock
Custom 450 / C450 / XM-25 (S45000), 403 ESR, AISI 616 / 422 ESR, B50A365 / 403Cb+
17-4PH / 630, M-152 / 1.4938 / S151, S159, FV520B / S143 / 1.4594. X22CrMoV12-1
13Х11Н2B2MФ / AE961W, 11Х11Н2B2MФ / 16Х11Н2B2MФ
AISI 615 / S41800, 15-5PH / XM-12 (S15500), A-286 AISI 660 / S66286
10705BU, 10705MBU, 10705AJ, S111, S131, S154
Hot search：12XH2
