High tensile steel 36CrNi3MoV
2026-09-23 10:53:20 Origin： Remark：0 Click：
NB/T 47008 - 2017 carbon and alloy steel forgings for pressure equipment 36CrNi3MoV heat treated round bar, plate, peeled rod, stock available flat bar
TECHNICAL DATA SHEET - GB 36CrNi3MoV
Steel type: 1.35Cr - 3.2Ni - 0.4Mo - 0.18V - 0.36C base alloy steel
Technical specification: NB/T 47008 - 2017
Stock in hand: round bar, flat bar
Profiles and dimensions:
Round bar, rod, disc (diameter): 6.0 ~ 950 mm
Square bar, flat bar: 10 ~ 650 mm
Plate, sheet, strip: T 0.5 ~ 300 x W 20 ~ 1000 x L mm
TYPICAL CHEMICAL ELEMENTS (mass weight - %)
Carbon, C (％): 0.32 ~ 0.42
Silicon, Si (％): ≤ 0.37
Manganese, Mn (％): 0.20 ~ 0.80
Phosphorus, P (％): ≤ 0.025
Sulfur, S (％): ≤ 0.015
Chromium, Cr (％): 1.20 ~ 1.50
Molybdenum, Mo (％): 0.35 ~ 0.45
Nickel, Ni (％): 3.00 ~ 3.50
Copper, Cu (%): ≤ 0.20
Vanadium, V (%): 0.10 ~ 0.25
Niobium, Nb (％): -
Titanium, Ti (％): -
Aluminum, Al (%): -
Nitrogen, N (%): -
Tungsten, W (%): -
Ferrum, Fe (%): balance.
MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT PRACTICE
Heat treatment temperature, annealing: -
Heat treatment temperature, normalizing: -
Heat treatment temperature, quenching: -
Heat treatment temperature, tempering : 540 degree centrigrade
Hardness after annealing, ≤ HB: -
Tensile strength, Rm: 1000 ~ 1150 MPa
Yield strength, Rp0.2: 895 MPa Min.
Elongation, A5: 16.0% Min.
Reduction of area, Z: -
Impact strength, AKv: -.
Hardness after final heat treatment, HB: -
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Mechanical parts - connecting rod, bolt and nuts.
Multi-diameter shaft, pressure vessel parts.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, mechanical gears, gear shaft, main axis, valve rod.
PRODUCT DESCRIPTION
36CrNI3MoV is usually produced by EAF + VD + LF / BEF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied black in the annealed condition.
Heat treatment condition- normalized + tempered, quenched + tempered.
TECHNICAL SALES ASSISTANCE & SERVICE
20+ years focus on special steel manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
If you are interested in our products or services, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers or sales department.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Mechanical parts - connecting rod, bolt and nuts.
Multi-diameter shaft, pressure vessel parts.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, mechanical gears, gear shaft, main axis, valve rod.
PRODUCT DESCRIPTION
36CrNI3MoV is usually produced by EAF + VD + LF / BEF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied black in the annealed condition.
Heat treatment condition- normalized + tempered, quenched + tempered.
TECHNICAL SALES ASSISTANCE & SERVICE
20+ years focus on special steel manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
If you are interested in our products or services, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers or sales department.
Further, please also check the materials in stock available:
Raw material - steels of blade for steam turbine
XM-25, S45000, GD450, C450
403 ESR, GB8732 type 12Cr12Mo, 10705BA/BB/BC
AISI 616, 422, 1.4935, X20CrMoWV12-1, 10705BU
B50A365B, 403Cb+, 1.4913, X19CrMoVNbN11-1
17-4PH, 630, 1.4542, X5CrNiCuNb16-4, 10705GU/GV/GW
M-152, S64152, 1.4938, X12CrNiMoV12-3, S151D
FV520B, S143, 1.4594, X4CrNiCuMo14-5
X22CrMoV12-1, 1.4923
13Х11Н2B2MФ, AE961W
15-5PH, XM-12, S15500
A286, AISI 660, S66286
10705MBU, 10705AJ
Non-magnetic 18.0% Manganese alloy steel:
1.3813, X40MnCrN19
1.3816, X8MnCrN18-18
1.3817, X40MnCr18
1.3818, X55MnCrN18-4
Hot search：
Previous page：Ferritic stainless steel 405
Last page：最后一页
Total list
Monthly rank
- 1638NiCrMo4
- 15S132
- 15EN33 / EN 33
- 1338NCD4
- 12EN18D / EN 18
- 12S11
- 12SAE9255/G92550
- 11SACM645
- 111.6772
- 11XC38