2016-07-18 11:25:27 Origin： Remark： Click：
Refractaloy 26 Specifications,Refractaloy 26 Chemical,Refractaloy 26 property from Steelmaking, ESR melted, Blooming, Forging, Hot rolling, Heat treatment, Straightening, Ultrasonic test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. We also possess the advanced precision machining equipments for further processing. Please just let us know what you inquire.
TECHNICAL DATA SHEET - Refractaloy 26
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: 18Cr - 38Ni - 18Co base high temperature alloy
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.08
Si (％): 0.50 ~ 1.50
Mn (％): 0.40 ~ 1.00
P (％)≤: 0.030
S (％)≤: 0.030
Cr (％): 16.0 ~ 20.0
Ni (％): 35.0 ~ 39.0
Mo (％): 3.00 ~ 3.40
Co (%): 16.0 ~ 22.0
W (%): -
Al (%): ≤ 0.30
Cu (%): -
Ti (%): 2.50 ~ 3.00
B (%): 0.001 ~ 0.010
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Tensile strength, σb/≥ MPa: 1000
Yield strength, σ0.2/≥ MPa: 550
Elongation, δ ≥(％): 15.0
Reduction of area, ф ≥ (％): 20.0
Hardness | HB: 262 ~ 331
Superalloy is widely used to produce the high temperature components for gas turbine in the field of aviation, naval vessels and industry, such as turbine blade, guide blade, turbine disc, high pressure compressor disc, combustor, and also production of energy conversion devices, such as aerospace craft, rocket motor, nuclear reactor, petrochemical equipments, coaly transforming and so on.
Heat treating fixture
Turbine engine parts - mechanical gears, gear shaft, main axis, blade
Mechanical parts - bolt and nut, fastener
Heat treatment furnace flask and components, especially in the carbonization.
These materials must stand up to high heat, extreme oxidation potential and recycling.
FORMS AND SHAPES
Round bar (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 700mm
Heavy/middle plate via hot rolled: T60 - 400mm X W60 ~ 1000mm X L1000 ~ 4000mm
Sheet steel via cold rolled: T1.0 - 6mm X W20- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL (email@example.com) our resident team of qualified production engineers.
Hot search：Refractaloy 26
Previous page：AISI 690 / R-26