N06617
2025-05-06 10:51:00 Origin: Remark:0 Click:
Specifications N06617 Datasheet, Inventory N06617 Chemical, Stockist N06617 Properties from Steelmaking, ESR melted, Blooming, Forging, Hot rolling, Heat treatment
TECHNICAL DATA SHEET - ASTM B564-04 type N06617
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY - Ni-Cr-Co-Mo Alloy
MELTING PROCESS - EAF + AOD / VIM + ESR
Official Test Certificate - issued by TUV - SGS - BV
TYPICAL CHEMICAL COMPOSITIONS (mass weight %)
Carbon, C (%): 0.05 ~ 0.15
Silicon, Si (%): ≤ 1.00
Manganese, Mn (%): ≤ 1.00
Phosphorus, P (%) ≤: 0.030
Sulfur, S (%) ≤: 0.015
Chromium, Cr (%): 20.0 ~ 24.0
Nickel, Ni (%): 44.5 min.
Molybdenum, Mo (%): 8.00 ~ 10.0
Copper, Cu (%): ≤ 0.50
Manganese, Mn (%): ≤ 1.00
Phosphorus, P (%) ≤: 0.030
Sulfur, S (%) ≤: 0.015
Chromium, Cr (%): 20.0 ~ 24.0
Nickel, Ni (%): 44.5 min.
Molybdenum, Mo (%): 8.00 ~ 10.0
Copper, Cu (%): ≤ 0.50
Aluminum, Al (%): 0.80 ~ 1.50
Titanium, Ti (%): ≤ 0.60
Cobalt, Co (%): 10.0 ~ 15.0
Boron, B (%): ≤ 0.006
Ferrum, Fe (%): 3.0 max.
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Solution annealed
Tensile strength, σb/≥ MPa: 655
Yield strength, σ0.2/≥ MPa: 241
Elonghation, δ ≥(%): 35.0
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution condition.
Final heat treatment - solution treated + Aged or double aged
FORMS AND DIMENSIONS AVAILABLE
Rod / round bar / disc (diameter): 5.5mm to 900mm
Square bar / flat bar: 8mm to 600mm
Heavy/middle plate via hot rolled: T15 - 300mm X W10 - 1000mm X L1000 - 12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W6 - 800mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
Condition: Solution annealed
Tensile strength, σb/≥ MPa: 655
Yield strength, σ0.2/≥ MPa: 241
Elonghation, δ ≥(%): 35.0
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution condition.
Final heat treatment - solution treated + Aged or double aged
FORMS AND DIMENSIONS AVAILABLE
Rod / round bar / disc (diameter): 5.5mm to 900mm
Square bar / flat bar: 8mm to 600mm
Heavy/middle plate via hot rolled: T15 - 300mm X W10 - 1000mm X L1000 - 12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W6 - 800mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search:N06617
Previous page:ASTM A437 Gr.B4C
Last page:Inconel 617