N06617 / Alloy 617 datasheet,N06617 / Alloy 617 chemical,N06617 / Alloy 617 heat treatment

N06617 / Alloy 617
2019-08-16 13:23:02   Origin:   Remark:0 Click:

Technical specifications of American high temperature alloys N06617 datasheet,N06617 Chemical compositions, N06617 mechanical properties from Steelmaking, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
 
TECHNICAL DATA SHEET - N06617 & alloy 617

OFFICIAL TEST CERTIFICATE: issued by TUV - SGS BV
MATERIAL CATEGORY: Ni-Cr-Co-Mo alloy steel
CHEMICAL COMPOSITION (WEIGHT %)
C (%):      0.05 ~ 0.15
Si (%):      ≤ 1.00
Mn (%):    ≤ 1.00
P (%)≤:    0.025
S (%)≤:    0.015
Cr (%):     20.0 ~ 24.0
Ni (%):     44.5 min.
Mo (%):    8.00 ~ 10.0
Co (%):    10.0 ~ 15.0
B (%):      ≤ 0.006
Al (%):      0.80 ` 1.50
Cu (%):     ≤ 0.50
Ti (%):      ≤ 0.60
Nb (%):     -
Fe (% ):    ≤ 3.00
MECHANICAL PROPERTIES UNDER SOLUTION ANNEALED
Tensile strength, σb/≥ MPa: 769
Yield strength, σ0.2/MPa: 315
Elongation, δ ≥(%): 50.0
Reduction of area, ф ≥ (%): 50.0
Hardness via heat treatment /HBW: 181
AVAILABLE FORMS AND SHAPES
Round bar (Diameter): 5.50 ~ 450mm
Square bar / Flat bar: 3 ~ 350mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.

TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers.

Hot search:N06617 / Alloy 617

Previous page:Inconel 617 / Alloy 617
Last page:Inconel 625

Share to: