Z50MC18-4 Non-magnectic Alloyed Steel
2026-10-21 12:44:00 Origin： Remark：0 Click：
Nonmagnetic alloy steel Z50MC18-4 stock available round bar, flat bar Z50MC18-4 forgings (ESR refined), hot forged 1050 ℃ heat treated, cold worked
TECHNICAL DATA SHEET - Z50MC18-4
Stock available: round bar 50 ~ 200 mm, ESR ingot
Material category: non-magnetic stainless steel and alloy
Technical standards: DIN SEW 390 (1991)
HS code: 7228 3091 / 7228 5000
Typical chemical compositions (mass fraction - %)
Carbon, C (％): 0.50 ~ 0.60
Silicon, Si (％): ≤ 1.00
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 17.5 ~ 20.0
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 4.00 ~ 5.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 4.00 ~ 5.00
Nickel, Ni (％): ≤ 1.00
Copper, Cu (％): ≤ 1.00
Nitrogen, N (％): 0.05 ~ 0.12
Copper, Cu (％): ≤ 1.00
Nitrogen, N (％): 0.05 ~ 0.12
HOT WORKING, HEAT TREATMENT AND MECHANICAL PROPERTIES
Hot working temperature: 1150~950℃
Quenching or solution treatment temperature: 1020~1120℃
Tensile strength, Rm ≥ /MPa: 750~1000
Yield strength, Rp0.2 ≥ MPa: 380
Elongation, A5 ≥ : 40.0
Impact strength, Akv ≥ J: 100
Yield strength, Rp0.2 ≥ MPa: 380
Elongation, A5 ≥ : 40.0
Impact strength, Akv ≥ J: 100
PROFILE AND DIMENSIONS
Round bar, rod, disc (diameter): 6.0 to 950 mm
Square bar, flat bar: 10 to 600 mm
Heavy / middle plate via hot rolled: T6 ~ 400 x W20 ~ 1200 x L1000 ~ 5000mm
Round bar, rod, disc (diameter): 6.0 to 950 mm
Square bar, flat bar: 10 to 600 mm
Heavy / middle plate via hot rolled: T6 ~ 400 x W20 ~ 1200 x L1000 ~ 5000mm
Forging piece: stepped shafts, other different shapes based on OEM.
PRODUCT DESCRIPTION
The alloy is usually produced by EF / EAF / AOD followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied in hot working, peeled condition.
Final heat treatment - solution treatment.
The alloy is usually produced by EF / EAF / AOD followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied in hot working, peeled condition.
Final heat treatment - solution treatment.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to Email our resident team of qualified production engineers. - Email: sales@ccsteels.com
If you meet further on any technical enquiry. pleased to Email our resident team of qualified production engineers. - Email: sales@ccsteels.com
Hot search：Z50MC18-4 FORGED ROUND BAR
Previous page：IS 7806 Grade 15
Last page：GJB 12CrNi2A
Total list
Monthly rank
- 13A289 Grade 18Mn18Cr Forged ring
- 12ASTM A276 Gr.44700 bright bar
- 518Cr12MoVNbN Heat treated steel bar
- 505Cr17Ni4Cu4Nb & 1.4542 & 17-4PH STEEL
- 5Aircraft steel D6AC
- 415Cr12WMoV Heat resisting steel
- 4ASTM A565 Grade 615
- 3B50A365B / 403Cb+ / 1.4913 Turbine Blade Steel
- 320Cr2Ni4A High Tensile Steel Round bar
- 3FV520B Martensitic Aging Steel