NF 10CD6
2015-08-08 19:18:38 Origin： Remark：0 Click：
Technical specifications of NF inactive standards structure steel 10CD6 datasheet - NF 10CD6 Chemical compositions, 10CD6mechanical properties from Steelmaking, ESR melted, Blooming, Forging, Hot rolling, Heat treatment, Straightening, Ultrasonic test, Cold working or Machined. We also possess the advanced precision machining equipments for further processing, just let us know what you inquire.
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION / DATASHEET - NF 10CD6
MATERIAL CATEGORY: French inactive standard structure steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.10~0.15
Si (％): 0.05~1.00
Mn (％): 0.30~0.60
P (％)≤: 0.030
S (％)≤: 0.025
Cr (％): 1.00~1.50
Ni (％): -
Si (％): 0.05~1.00
Mn (％): 0.30~0.60
P (％)≤: 0.030
S (％)≤: 0.025
Cr (％): 1.00~1.50
Ni (％): -
Mo (%): 0.40~0.70
Other(％): -
MECHANICAL PROPERTIES
Tensile strength / σb/MPa|≥: 440
Yield strength / σs/MPa|≥: 295
Elongation / 5(％)|≥: 22
Reduction ratio / ψ(％)|≥: 60
Delivery hardness /HBS|≥: 179
Yield strength / σs/MPa|≥: 295
Elongation / 5(％)|≥: 22
Reduction ratio / ψ(％)|≥: 60
Delivery hardness /HBS|≥: 179
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / QT
AVAILABLE SHAPES
Round bar /Flat bar / Square bar /Tube, /Steel strip, /sheet
Bright - peeled + polishing, centerless grinding
Forged - ring, discs, shaft
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
Mr.Jiang - Email: lh.steel@hotmail.com
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
Mr.Jiang - Email: lh.steel@hotmail.com
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD 3-219 mm, with wall thickness ranging from 0.50 to 35 mm.
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD 3-219 mm, with wall thickness ranging from 0.50 to 35 mm.
Total list
Monthly rank
- 3421CrMoV5-11
- 3134CrNiMo6V
- 3016NC6
- 2726NiCrMoV14-5
- 2720NCD2
- 25AISI/SAE 6140
- 23B5F5B
- 2134CrNiMo4
- 2123MnB4 / 1.5535
- 2018MND5
