10CND6
2026-03-03 16:36:00 Origin： Remark：0 Click：
Low alloy structure steel 10CND6 peeled round bar, flat bar, plate, cold drawn rod, ESR remelted, hot bloomed 10CND6 hot forged rolled, heat treated, cold worked
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL DATA SHEET - 10CND6
Material category: 1.4Cr - 1.0Ni - 0.22Mo base structure steel
Typical chemical elements (mass weight %)
Carbon, C (％): 0.09 ~ 0.13
Silicon, Si (％): 0.20 ~ 0.40
Manganese, Mn (％): 0.35 ~ 0.70
Phosphorus, P (％): ≤ 0.040
Sulfur, S (％): ≤ 0.035
Chromium, Cr (％): 1.20 ~ 1.60
Nickel, Ni (％): 0.80 ~ 1.20
Silicon, Si (％): 0.20 ~ 0.40
Manganese, Mn (％): 0.35 ~ 0.70
Phosphorus, P (％): ≤ 0.040
Sulfur, S (％): ≤ 0.035
Chromium, Cr (％): 1.20 ~ 1.60
Nickel, Ni (％): 0.80 ~ 1.20
Molybdenum, Mo (%): 0.15 ~ 0.30
Ferrum, Fe (％): balance
MECHANICAL PROPERTIES UNDER ROOM TEPM.
Tensile strength, Rm / MPa ≥: 1080
Yield strength, Rp0.2 / MPa ≥: 885
Elongation, A5 (％) ≥: 14
Delivery hardness / HBS ≥: 217
Yield strength, Rp0.2 / MPa ≥: 885
Elongation, A5 (％) ≥: 14
Delivery hardness / HBS ≥: 217
PRODUCT DESCRIPTION
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - quenched and tempered.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners.
Process plant – fasteners.
Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut.
Multidiameter shaft.
Pressure vessel.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
PROFILE & DIMENSIONS
Round bar / rod / disc (diameter): 6.0 to 900 mm
Square bar / flat bar: 10 to 600 mm
Length: random length or based on the customer's special requirement.
Round bar / rod / disc (diameter): 6.0 to 900 mm
Square bar / flat bar: 10 to 600 mm
Length: random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 ~ 200 X W20 ~ 1500 X L1000 ~ 12000 mm
Sheet steel via cold rolled: T0.5 ~ 6 X W15 ~ 1000 X L1000 ~ 2000 mm
Steel strip via cold rolled: T0.3 ~ 3 X W10 ~ 200 X L mm (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
Steel strip via cold rolled: T0.3 ~ 3 X W10 ~ 200 X L mm (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
Total list
Monthly rank
- 18S135
- 1611SMnPb30
- 15NF 20NC11
- 14EN35B
- 141.7380
- 14SCr435
- 13ASTM 1526/G15260
- 13635H15 / 635M15 / En351
- 131.7005
- 13AISI 8645H