ASTM A336 type F1
2025-12-13 16:02:00 Origin： Remark：0 Click：
ASTM A336 - 2009 Alloy steel F1 peeled round bar, flat bar and forgings Steelmaking, F1 ESR melted, hot forged, rolled, heat treated
TECHNICAL DATA SHEET - ASTM A336 type F1
Technical specification - ASTM A336 - 2009
Material type - 0.7Mn- 0.5Mo base alloy steel
Typcial chemical elements (mass weight - %)
Carbon, C (％): 0.20 ~ 0.30
Typcial chemical elements (mass weight - %)
Carbon, C (％): 0.20 ~ 0.30
Manganese, Mn (％): 0.60 ~ 0.80
Silicon, Si (％): 0.20 ~ 0.35
Silicon, Si (％): 0.20 ~ 0.35
Phosphorus, P (％): ≤ 0.025
Sulfur, S (％): ≤ 0.025
Chromium, Cr (%): -
Molybdenum, Mo (%): 0.40 ~ 0.60
Sulfur, S (％): ≤ 0.025
Chromium, Cr (%): -
Molybdenum, Mo (%): 0.40 ~ 0.60
Nickel, Ni (%): -
TYPICAL MECHANICAL PROPERTIES
Tensile strength, Rm ≥ MPa: 485 ~ 660
Yield strength, Rp0.2 / MPa: 275
Elongation, A5 ≥ (％): 20.0
Reduction of area, Z ≥ (％): 40.0
Hardness via heat treatment /HBW: 215 max.
Reduction of area, Z ≥ (％): 40.0
Hardness via heat treatment /HBW: 215 max.
PRODUCT DESCRIPTION
The alloy is usually produced by EAF / VD / LF, followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / disc (diameter): 6.0 to 850 mm
Square bar / flat bar: 10 to 610 mm
Length: random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T6 ~ 200 X W100 ~ 1500 X L1000 ~ 12000 mm
Forging piece: stepped shafts, other different shapes based on OEM.
The alloy is usually produced by EAF / VD / LF, followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / disc (diameter): 6.0 to 850 mm
Square bar / flat bar: 10 to 610 mm
Length: random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T6 ~ 200 X W100 ~ 1500 X L1000 ~ 12000 mm
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineer, Email: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineer, Email: sales@ccsteels.com.
Previous page：Inconel 601GC
Last page：Grade F11 Class 1
Total list
Monthly rank
- 2326NiCrMoV14-5
- 2138B3
- 18EN33 / EN 33
- 1530Mn5
- 1535CrMnSiA
- 1530CrMnSiNi2A
- 1320MnMo
- 1326NiCrMoV14-6
- 1324CrMo5
- 12XC60