ASTM A336 Gr.F22
2019-07-15 14:24:19 Origin： Remark：0 Click：
ASTM A336 type F22 Round bar, plate, sheet F22 ESR melted, Hot forging, Hot rolling, Heat treated, Straightening, 100% Ultrasonic test, Cold working or rough turned.
TECHNICAL DATA SHEET - ASTM A336 Grade F22
MATERIAL TECHNICAL STANDARDS: ASTM A336 - 2009
MATERIAL TYPE: Alloy steel
STOCK LIST & INVENTORY - Round bar diam. 70 ~ 180mm, plate T7 ~ 20 X W500 ~ 1500 X Lmm
STOCK LIST & INVENTORY - Round bar diam. 70 ~ 180mm, plate T7 ~ 20 X W500 ~ 1500 X Lmm
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.05 ~ 0.15
Carbon, C (％): 0.05 ~ 0.15
Manganese, Mn (％): 0.30 ~ 0.60
Silicon, Si (％): ≤ 0.50
Silicon, Si (％): ≤ 0.50
Phosphorus, P (％)≤: 0.020
Sulfur, S (％)≤: 0.015
Chromium, Cr (%): 2.00 ~ 2.50
Molybdenum, Mo (%): 0.90 ~ 1.10
Sulfur, S (％)≤: 0.015
Chromium, Cr (%): 2.00 ~ 2.50
Molybdenum, Mo (%): 0.90 ~ 1.10
Nickel, Ni (%): -
Vanadium, V (%): -
Copper, Cu (%): -
Nitrogen, N (%): -
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb/≥ MPa: 415 ~ 585
Yield strength, σ0.2/MPa: 215
Elongation, δ ≥(％): 20.0
Reduction of area, ф ≥ (％): 45.0
Hardness via heat treatment /HBW: 220 Max.
Reduction of area, ф ≥ (％): 45.0
Hardness via heat treatment /HBW: 220 Max.
PRODUCT DESCRIPTION
The alloy is usually produced by BEF / EAF + VD followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 500mm X W100 - 1500mm X L1000 - 6000mm
Forging piece: stepped shafts, other different shapes based on OEM.
The alloy is usually produced by BEF / EAF + VD followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 500mm X W100 - 1500mm X L1000 - 6000mm
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Previous page：X2CrCuNbTiV22-1
Last page：1.4622
