ASTM A182 Grade F5a Stockist, ASTM A182 Grade F5a Equivalent Steel

ASTM A182 Grade F5a
2019-09-18 12:56:53   Origin:   Remark:0 Click:

Description ASTM A182 Grade F5a Stocklist, Suppliers Grade F5a Ex-stock, ASTM A182 Grade F5a Mechanical property from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treat, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. Technical specification - ASTM A182 - 2018.
TECHNICAL DATA SHEET - Grade ASTM A182 Grade F5a

MATERIAL TECHNICAL STANDARDS: ASTM A182 - 2018
MATERIAL TYPE: 0.6Cr- 0.5Mo Alloy steel
CHEMICAL COMPOSITION (Mass weight - %)
C (%):     ≤ 0.25
Mn (%):   ≤ 0.60
Si (%):    ≤ 0.50
P (%)≤:   0.040
S (%)≤:   0.030
Cr (%):    4.00 ~ 6.00
Mo (%):   0.44 ~ 0.65
Ni (%):     -
Nb (%):    -
Ti (%):     -
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb/≥ MPa: 620
Yield strength, σ0.2/MPa: 450
Elongation, δ ≥(%): 22.0
Reduction of area, ф ≥ (%): 50.0
Hardness via heat treatment /HBW: 187 ~ 248
HEAT TREATMENT PRACTICE
Condition: annealed 955 Deg.
Cooling medium: furnace cool
PRODUCT DESCRIPTION
The alloy is usually produced by BEF / BEF + AOD / EAF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 650mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 400mm X W20 - 1200mm X L1000-5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry. pleased to EMAIL
 our resident team of qualified production engineers, Email: sales@ccsteels.com

Hot search:ASTM A182 Grade F5a

Previous page:STS305
Last page:K42544

Share to: