ASTM A182 Grade F10 Stockist, ASTM A182 Grade F10 Equivalent Steel

ASTM A182 Grade F10
2019-09-24 10:00:03   Origin:   Remark:0 Click:

ASTM A182 Material Specifications Standard Specification high temperature service F10 Round bar, Flat bar, Plate ESR melted, Heat treatment, Cold worked.
 
TECHNICAL DATA SHEET - ASTM A182 Grade F10

MATERIAL TECHNICAL STANDARDS: ASTM A182 - 2018
MATERIAL TYPE: 8.0Cr- 20.0Ni Alloy steel
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (%):  0.10 ~ 0.20
Manganese, Mn (%):  0.50 ~ 0.80
Silicon, Si (%):  1.00 ~ 1.40
Phosphorus, P (%) ≤:  0.040
Sulfur, S (%) ≤:  0.030
Chromium, Cr (%):  7.00 ~ 9.00
Molybdenum, Mo (%):  19.0 ~ 22.0
Nickel, Ni (%):  -
Niobium, Nb (%):   -
Titanium, Ti (%):   -
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb/ ≥ MPa: 550
Yield strength, σ0.2 /MPa: 205
Elongation, δ ≥ (%): 30.0
Reduction of area, ф ≥ (%): 40.0
Hardness via heat treatment /HBW: -
HEAT TREATMENT PRACTICE
Condition: Solution annealed 1040 Deg. C
Cooling medium: water or oil cool
PRODUCT DESCRIPTION
The alloy is usually produced by BEF / BEF + AOD / EAF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Disc (diameter):  5.50mm to 550mm
Square bar / Flat bar: 10mm to 500mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 ~ 400mm X W200 ~ 1200mm X L1000 ~ 5000mm
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry. pleased to EMAIL ( sales@ccsteels.com) our resident team of qualified production engineers.

Hot search:ASTM A182 Grade F10

Previous page:K90941
Last page:K33100

Share to: