Martensitic stainless steel S64152
2026-10-06 09:27:00 Origin： Remark：0 Click：
Material Specifications ASTM A565 Martensitic Alloy Steel S64152 Round bar, Flat bar, Plate, Hexagon bar, Hot forging & hot rolling, Heat treatment, Cold working.
MARTENSITIC STAINLESS STEEL - S64152
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - CNAS
STOCK AVAILABLE: round bar 50 ~ 210 mm
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.08 ~ 0.15
Silicon, Si (％): ≤ 0.35
Manganese, Mn (％): 0.50 ~ 0.90
PHosphorus, P (％)≤: 0.025
Sulfur, S (％)≤: 0.025
Chromium, Cr (％): 11.0 ~ 12.5
Nickel, Ni (％): 2.00 ~ 3.00
Molybdenum, Mo (％): 1.50 ~ 2.00
Silicon, Si (％): ≤ 0.35
Manganese, Mn (％): 0.50 ~ 0.90
PHosphorus, P (％)≤: 0.025
Sulfur, S (％)≤: 0.025
Chromium, Cr (％): 11.0 ~ 12.5
Nickel, Ni (％): 2.00 ~ 3.00
Molybdenum, Mo (％): 1.50 ~ 2.00
Vanadium, V (％): 0.25 ~ 0.40
Nitrogen, N (%): 0.01 ~ 0.05
TYPICAL MECHANICAL PROPERTIES
Condition of heat treatment: annealing
Hardness | HRB: ≤311
Condition of heat treatment: +HT 955 / 1022℃ air/oil cooling, 565℃ min. 2h tempering
Tensile strength, σb/MPa: 1000
Yield strength, σ0.2/MPa: 795
Yield strength, σ0.2/MPa: 795
Elongation, δ5 (％): 13.0
Reduction of area, ф (％): 35.0
Hardness | HBW: 302 ~ 352
Reduction of area, ф (％): 35.0
Hardness | HBW: 302 ~ 352
PRODUCT DESCRIPTION
The alloy is usually produced by BEF + AOD / EAF followed by electroslag refining (ESR or VAR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the annealed condition.
Final heat treatment - Quenched and tempered, + SRA
The alloy is usually produced by BEF + AOD / EAF followed by electroslag refining (ESR or VAR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the annealed condition.
Final heat treatment - Quenched and tempered, + SRA
PROFILES AND DIMENSIONS
Round bar & Disc: diam. 6.0 ~ 800 mm
Heavy/middle plate via hot forged / rolled: T6 ~ 350 x W20 ~ 1000 x L1000 ~ 5000 mm
Sheet steel via cold rolled: T1.0 ~ 4 X W10 ~ 300 x L1000 - 2000mm
Steel strip via cold rolled: T0.5 ~3 X W10 ~ 200 x L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Sheet steel via cold rolled: T1.0 ~ 4 X W10 ~ 300 x L1000 - 2000mm
Steel strip via cold rolled: T0.5 ~3 X W10 ~ 200 x L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to Email (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry, pleased to Email (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search：S64152
Previous page：SKD12 / 1.2363 / A2
Last page：SKD4
