Aermet 100 & AM100
2026-01-26 15:29:00 Origin： Remark：0 Click：
Stock available high tensile strength steel Aermet 100 round bar, plate, flat bar and forgings Inventory Properties VIM ESR & VAR technique, hot bloomed, forged, rolled, heat treated
TECHNICAL DATA SHEET - Aermet 100
Official test certificate: issued by TUV - SGS - BV
Special melting process: EAF / AOD + ESR
HS Code For Customs - 72221100 / 72221900 / 72222000
Material category: nickel11.0 - cobalt13.0 base superalloy
Typical chemical compositions (mass fraction %)
Carton, C (％): 0.21 ~ 0.25
Silicon, Si (％): ≤ 0.10
Manganese, Mn (％): ≤ 0.10
Phosphorus, P (％): ≤ 0.010
Sulfur, S (％): ≤ 0.008
Chromium, Cr (％): 2.90 ~ 3.30
Nickel, Ni (％): 11.0 ~ 12.0
Molybdenum, Mo (%): 1.10 ~ 1.30
Cobalt, Co (％): 13.0 ~ 14.0
Aluminum, Al (%): ≤ 0.015
Copper, Cu: (%): -
Titanium, Ti (%): ≤ 0.015
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb ≥ MPa: 1900
Yield strength, σ0.2 / MPa: 1600
Elongation, δ5 ≥ (％): 10.0
Reduction of area, ф ≥ (％): 55.0
Hardness via annealed treated /HBW: 365 max.
TYPICAL APPLICATIONS
Superalloy is widely used to produce the high temperature components for gas turbine in the field of aviation, naval vessels and industry, such as turbine blade, guide blade, turbine disc, high pressure compressor disc, combustor, and also production of energy conversion devices, such as aerospace craft, rocket motor, nuclear reactor, petrochemical equipments, coaly transforming and so on. The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution + Aged or Double aged.
AVAILABLE FORMS & DIMENSIONS
Rod / round bar / disc (diameter): 5.5 ~ 700 mm
Square bar / flat bar: 8 ~ 600 mm
Wire rod (Diameter): 0.50 ~ 16 mm
Steel strip via cold rolled: T0.5 ~ 3 X W15 ~ 350 X L (or in coil form)
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE AND SERVICE
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
If you meet further on any technical enquiry or help, pleased to EMAIL our qualified production engineers TODAY, Email: sales@ccsteels.com.
Tensile strength, σb ≥ MPa: 1900
Yield strength, σ0.2 / MPa: 1600
Elongation, δ5 ≥ (％): 10.0
Reduction of area, ф ≥ (％): 55.0
Hardness via annealed treated /HBW: 365 max.
TYPICAL APPLICATIONS
Superalloy is widely used to produce the high temperature components for gas turbine in the field of aviation, naval vessels and industry, such as turbine blade, guide blade, turbine disc, high pressure compressor disc, combustor, and also production of energy conversion devices, such as aerospace craft, rocket motor, nuclear reactor, petrochemical equipments, coaly transforming and so on. The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution + Aged or Double aged.
AVAILABLE FORMS & DIMENSIONS
Rod / round bar / disc (diameter): 5.5 ~ 700 mm
Square bar / flat bar: 8 ~ 600 mm
Wire rod (Diameter): 0.50 ~ 16 mm
Steel strip via cold rolled: T0.5 ~ 3 X W15 ~ 350 X L (or in coil form)
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE AND SERVICE
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
If you meet further on any technical enquiry or help, pleased to EMAIL our qualified production engineers TODAY, Email: sales@ccsteels.com.
Previous page：FE-PM 3504
Last page：AMS 6532
