Duratherm 2602
2017-09-27 08:53:35 Origin： Remark：0 Click：
Technical specifications of alloys Duratherm 2602 Round bar, Flat bar, Sheet, Heat treatment, Shaft, Ultrasonic flaw detection test, Cold working or Machined.
MATERIAL TECHNICAL DATA SHEET - Grade Duratherm 2602
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Cr - Ni- Mo - Co - W Series alloy
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.05
Silicon, Si (％): 0.20 ~ 0.60
Manganese, Mn (％): 0.40 ~ 1.10
Phosphorus, P (％)≤: 0.030
Carbon, C (％): ≤ 0.05
Silicon, Si (％): 0.20 ~ 0.60
Manganese, Mn (％): 0.40 ~ 1.10
Phosphorus, P (％)≤: 0.030
Sulfur, S (％)≤: 0.020
Chromium, Cr (％): 11.7 ~ 12.3
Chromium, Cr (％): 11.7 ~ 12.3
Nickel, Ni (％): balance
Molybdenum, Mo (％): 3.70 ~ 4.30
Cobalt, Co (%): 41.0 ~ 42.0
Cobalt, Co (%): 41.0 ~ 42.0
Tungsten, W (%): 3.60 ~ 4.20
Aluminum, Al (%): -
Aluminum, Al (%): -
Copper, Cu (%): ≤ 0.30
Titanium, Ti (%): 0.80 ~ 1.20
Titanium, Ti (%): 0.80 ~ 1.20
Ferrum, Fe (%): 9.80 ~ 10.4
Niobium, Nb (%): ≤ 0.10
Beryllium, Be (%): 0.20 ~ 0.30
TYPICAL APPLICATIONS
Superalloy is widely used to produce the high temperature components for gas turbine in the field of aviation, naval vessels and industry, such as turbine blade, guide blade, turbine disc, high pressure compressor disc, combustor, and also production of energy conversion devices, such as aerospace craft, rocket motor, nuclear reactor, petrochemical equipments, coaly transforming and so on. The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution + Aged
FORMS AND SHAPES
Round bar (Diameter): 0.50mm to 650mm
Square bar / Flat bar: 3mm to 450mm
Superalloy is widely used to produce the high temperature components for gas turbine in the field of aviation, naval vessels and industry, such as turbine blade, guide blade, turbine disc, high pressure compressor disc, combustor, and also production of energy conversion devices, such as aerospace craft, rocket motor, nuclear reactor, petrochemical equipments, coaly transforming and so on. The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution + Aged
FORMS AND SHAPES
Round bar (Diameter): 0.50mm to 650mm
Square bar / Flat bar: 3mm to 450mm
Wire rod (Diameter): 0.20 to 13mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers. - Email:
E-mail: sales@ccsteels.com
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers. - Email:
E-mail: sales@ccsteels.com
Previous page：135 Mod
Last page：ASTM M30 / T13130
Total list
Monthly rank
- 50FSX-414
- 16Aquamet 22
- 1510705BU
- 15AMS 5221
- 13Carpenter 20 Mo 4
- 12X12CrNiMoV12-2
- 11Inconel 610
- 10AMS 5354
- 9Incoloy 840
- 8Aquamet 17
