AMS 5616
2026-04-03 14:04:00 Origin： Remark：0 Click：
AMS 5616 equivalents steel coil stockist round bar, S41800 flat bar steelmaking, ESR melted, hot forged / rolled, heat treated 100% Ultrasonic flaw detection test, cold machined.
TECHNICAL DATA SHEET - AMS 5616
Official test report: issued by TUV - SGS - BV
Material category: 13Cr - 2.0Ni - 3.0W martensitic steel
Stock in hand: diameter 55mm, strip Thk2.0 X width 200 mm
Typical chemical compositions (mass fraction %)
Carbon, C (％): 0.15 ~ 0.20
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): ≤ 0.50
Phosphorus, P (％): ≤ 0.030
Carbon, C (％): 0.15 ~ 0.20
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): ≤ 0.50
Phosphorus, P (％): ≤ 0.030
Sulfur, S (％): ≤ 0.015
Chromium, Cr (％): 12.0 ~ 13.0
Chromium, Cr (％): 12.0 ~ 13.0
Nickel, Ni (％): 1.80 ~ 2.20
Molybdenlum, Mo (％): ≤ 0.50
Cobalt, Co (%): -
Cobalt, Co (%): -
Tungsten, W (%): 2.50 ~ 3.50
Aluminum, Al (%): -
Aluminum, Al (%): -
Copper, Cu (%): ≤ 0.30
Titanium, Ti (%): -
Titanium, Ti (%): -
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, Rm ≥ MPa: 965
Yield strength, Rp0.2 ≥ MPa: 760
Elongation, A5 ≥ (％): 15.0
Reduction of area, Z ≥ (％): 45.0
Hardness | HBW: 302 ~ 352
Reduction of area, Z ≥ (％): 45.0
Hardness | HBW: 302 ~ 352
Heat treatment practice: hardening at 954°C, oil quench followed by tempering at 649°C, air cool
AVAILABLE DIMENSIONS
Round bar (Diameter): 5.5 ~ 450mm
Square bar / Flat bar: 10 ~ 450mm
AVAILABLE DIMENSIONS
Round bar (Diameter): 5.5 ~ 450mm
Square bar / Flat bar: 10 ~ 450mm
Wire rod (Diameter): 1.0 ~ 13mm
Steel strip via cold rolled: T0.5 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.5 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
ADVANTAGE & SUPERIOR SERVICE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
Previous page：Alloy G-192
Last page：Z3CT20
