AMS 5526
2014-09-26 14:04:18 Origin: Remark:0 Click:
Aerospace AMS 5526 Datasheet, Chemical AMS 5526 Supplier, AMS 5526 Forging plate machined, Inventory AMS 5526 Exporters, Technical specifications From Melting, ESR & VAR technique, Hot Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, Ultrasonic flaw detection test.
MATERIAL DATA SHEET - AMS 5526
MATERIAL CATEGORY - 19Cr-9Ni-1Mo-Ti-Nb precipitation hardening steel
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312
CHEMICAL COMPOSITION (WEIGHT %)
C (%): 0.28 ~ 0.35
Si (%): 0.30 ~ 0.80
Mn (%): 0.75 ~ 1.50
P (%)≤: 0.040
S (%)≤: 0.030
Cr (%): 18.0 ~ 21.0
Ni (%): 8.00 ~ 11.0
Mo (%): 1.00 ~ 1.75
Si (%): 0.30 ~ 0.80
Mn (%): 0.75 ~ 1.50
P (%)≤: 0.040
S (%)≤: 0.030
Cr (%): 18.0 ~ 21.0
Ni (%): 8.00 ~ 11.0
Mo (%): 1.00 ~ 1.75
Ti (%): 0.10 ~ 0.35
Nb (%): 0.25 ~ 0.60
W (%): 1.00 ~ 1.75
Cu (%): ≤ 0.50
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb/MPa: 540
Yield strength, σ0.2/MPa: 255
Elongation, δ(%): 30.0
Hardness | HRB(HRC): 100
Yield strength, σ0.2/MPa: 255
Elongation, δ(%): 30.0
Hardness | HRB(HRC): 100
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / EAF VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by AOD / EAF VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment / QT
AVAILABILITY
Round bar / flat bar / strip / forgings / plate
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
Round bar / flat bar / strip / forgings / plate
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 1000mm
Plate / Sheet steel / Steel strip: 0.1mm to 1000mm
Width: 8mm to 1200mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Round bar / Wire rod (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 1000mm
Plate / Sheet steel / Steel strip: 0.1mm to 1000mm
Width: 8mm to 1200mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.