X10CrMoVNb9-1
2019-04-02 13:44:27 Origin： Remark：0 Click：
Alloy steels X10CrMoVNb9-1 Ex-stock, X10CrMoVNb9-1 Chemical, X10CrMoVNb9-1properties from Steelmaking, ESR melt, Hot blooming, UT, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or Machined. Technical specifications - ISO / TR 4956 - 1984, 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - X10CrMoVNb9-1
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: High temperature alloy steel
MATERIAL SPECIFICATIONS: DIN EN 10302
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.08 ~ 0.12
Si (％): ≤ 0.50
Mn (％): 0.30 ~ 0.60
Si (％): ≤ 0.50
Mn (％): 0.30 ~ 0.60
P (％)≤: 0.020
S (％)≤: 0.015
Cr (％): 8.00～9.50
Ni (％): ≤ 0.40
S (％)≤: 0.015
Cr (％): 8.00～9.50
Ni (％): ≤ 0.40
Mo (%): 0.85 ~ 1.05
W (%): -
N (%): 0.03 ~ 0.07
Nb (%): 0.06 ~ 0.10
V (%): 0.18 ~ 0.25
Other (％): Al ≤ 0.040
Other (％): Al ≤ 0.040
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition of heat treatment: Quenched and tempered
Tensile strength, σb ≥/MPa: 620 ~ 850
Yield strength, σ0.2 ≥/MPa: 420
Yield strength, σ0.2 ≥/MPa: 420
Elontation, δ ≥(％): 20.0
Reduction of area, ф ≥(％): -
Hardness | HBW: -
Reduction of area, ф ≥(％): -
Hardness | HBW: -
PRODUCT DESCRIPTION
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
FORMS AND SHAPES
Round bar (Diameter): 5.50 ~ 650mm
Square bar / Flat bar: 3 ~ 650mm
Round bar (Diameter): 5.50 ~ 650mm
Square bar / Flat bar: 3 ~ 650mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Hot search：X10CrMoVNb9-1
Previous page：Kovar / 1.3981 / Alloy K
Last page：1.4903
Total list
Monthly rank
- 50FSX-414
- 16Aquamet 22
- 1510705BU
- 15AMS 5221
- 13Carpenter 20 Mo 4
- 12X12CrNiMoV12-2
- 11Inconel 610
- 10AMS 5354
- 9Incoloy 840
- 8Aquamet 17
