AMS 5602
2020-08-21 13:14:43 Origin： Remark：0 Click：
Descriptions AMS 5502 rolling,AMS 5502 Chemical,AMS 5502 Forge Properties from Steelmaking, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATASHEET - AMS 5602
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - high temperature pressure vessel steel
MATERIAL SPECIFICATIONS - SAE 5502
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.08 ~ 0.15
Si (％): ≤ 0.50
Mn (％): 0.30 ~ 0.60
P (％)≤: 0.025
S (％)≤: 0.020
Cr (％): 4.00 ~ 6.00
Mo (％): 0.45 ~ 0.65
Si (％): ≤ 0.50
Mn (％): 0.30 ~ 0.60
P (％)≤: 0.025
S (％)≤: 0.020
Cr (％): 4.00 ~ 6.00
Mo (％): 0.45 ~ 0.65
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: quenched and tempered
Tensile strength σb≥/MPa: 590 ~ 740
Yield strength σs≥/MPa: 390
Elongation δ5≥(%): 17.0
Impact strength, AKv≥/J: 62
Annealed hardness HBS: 175 ~ 220
Yield strength σs≥/MPa: 390
Elongation δ5≥(%): 17.0
Impact strength, AKv≥/J: 62
Annealed hardness HBS: 175 ~ 220
HOT WORKING AND HEAT TREATMENT
Hot working temperature /℃: 1100 ~ 850
Annealing temperature /℃: 680 ~ 730
Quenching temperature /℃: 950～1000
Cooling medium: Oil quenched
Annealing temperature /℃: 680 ~ 730
Quenching temperature /℃: 950～1000
Cooling medium: Oil quenched
Tempering temperature /℃: 700～760
AVAILABLE SHAPES
Plate / Steel strip / Sheet / Bar / Shaft
Bright - milling, polishing, cold machined/finished
Plate / Steel strip / Sheet / Bar / Shaft
Bright - milling, polishing, cold machined/finished
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe
PRODUCT PROFILE & FORMS
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W50 - 1000mm X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 6mm X W100- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W100- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Total list
Monthly rank
- 50FSX-414
- 16Aquamet 22
- 1510705BU
- 15AMS 5221
- 13Carpenter 20 Mo 4
- 12X12CrNiMoV12-2
- 11Inconel 610
- 10AMS 5354
- 9Incoloy 840
- 8Aquamet 17
