AMS 5764
2021-04-30 14:55:17 Origin： Remark：0 Click：
Austenitic Stainless Steel AMS 5764 Specifications AMS 5764 Round bar, Flat bar, ESR refined, Stock Available Hot rolling, Heat treatment
TECHNICAL DATA SHEET - AMS 5764
Stock Available & Inventory - Round bar Diam. 20 ~ 160mm
Technical standards - SAE AMS 5764D
TYPICAL CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.060
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 4.00 ~ 6.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 20.5 ~ 23.5
Nickel, Ni (％): 11.5 ~ 13.5
Molybdenum, Mo (％): 1.50 ~ 3.00
Niobium, Nb (％): 0.10～0.30
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 4.00 ~ 6.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 20.5 ~ 23.5
Nickel, Ni (％): 11.5 ~ 13.5
Molybdenum, Mo (％): 1.50 ~ 3.00
Niobium, Nb (％): 0.10～0.30
Nitrogen, N (%): 0.20 ~ 0.40
Vanadim, V (%): 0.10 ~ 0.30
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, Rm / MPa: 690 min.
Yield strength, Rp0.2 / MPa: 380 min.
Elongation, A5 (％): 35.0 min.
Reduction area, Z (％): 55 min.
Elongation, A5 (％): 35.0 min.
Reduction area, Z (％): 55 min.
Hardness (HBW): -
Hardness | HRB: -
Cold bending property: None
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / EF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
The alloy is usually produced by AOD / VOD / EF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 400mm
Wire rod (Diameter): 0.15 ~ 15mm
Flat bar (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Length: random length, fixed length or based on the customer's special requirement.
Form: wire or straightened bar
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers.- Email: sales@ccsteels.com.
Round bar (Diameter): 5.5 ~ 400mm
Wire rod (Diameter): 0.15 ~ 15mm
Flat bar (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Length: random length, fixed length or based on the customer's special requirement.
Form: wire or straightened bar
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers.- Email: sales@ccsteels.com.
