AMS 5589
2021-07-05 08:55:55 Origin： Remark：0 Click：
Inventory AMS 5589 Specifications, Suppliers AMS 5589 Datasheet, AMS 5589 Stockholder from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treat, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
MATERIAL SPECIFICATIONS DATASHEET - Grade AMS 5589
Material Category - Aerospace Material Steel Series
Techncial Specifications - AMS 5589D
HS Code for Customs - 72221100 / 72221900 / 72223000
Techncial Specifications - AMS 5589D
HS Code for Customs - 72221100 / 72221900 / 72223000
Official Test Report- issued by TUV - SGS - BV
Chemical compositions (Mass weight %)
Chemical compositions (Mass weight %)
C (％): ≤ 0.08
Si (％): ≤ 0.35
Mn (％): ≤ 0.35
P (％) ≤: 0.015
S (％) ≤: 0.015
Cr (％): 17.0 ~ 21.0
Co (%): ≤ 1.00
Mo (％): 2.80 ~ 3.30
Nb/Ta (％): 4.75 ~ 5.50
Ti (%): 0.65 ~ 1.15
Al (%): 0.20 ~ 0.80
B (%): ≤ 0.006
Fe (%): Remainder
Si (％): ≤ 0.35
Mn (％): ≤ 0.35
P (％) ≤: 0.015
S (％) ≤: 0.015
Cr (％): 17.0 ~ 21.0
Co (%): ≤ 1.00
Mo (％): 2.80 ~ 3.30
Nb/Ta (％): 4.75 ~ 5.50
Ti (%): 0.65 ~ 1.15
Al (%): 0.20 ~ 0.80
B (%): ≤ 0.006
Fe (%): Remainder
Cu (%): ≤ 0.30
Ni (%): 50.0 ~ 55.0
Ta (%): -
Ni (%): 50.0 ~ 55.0
Ta (%): -
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Bars, plate, tubings and forgings
Form: Bars, plate, tubings and forgings
Heat treatment condition: solution annealing treated
Tensile strength, σb/MPa: 1069
Yield strength, σ0.2/MPa: 655
Elongation, δ(％): 30.0
Reduction of area, ф (％): -
Elongation, δ(％): 30.0
Reduction of area, ф (％): -
Hardness | HRW: -
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD, VOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 400mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 300mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD, VOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 400mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 300mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Total list
Monthly rank
- 50FSX-414
- 16Aquamet 22
- 1510705BU
- 15AMS 5221
- 13Carpenter 20 Mo 4
- 12X12CrNiMoV12-2
- 11Inconel 610
- 10AMS 5354
- 9Incoloy 840
- 8Aquamet 17
