AMS 5590
2021-07-07 09:42:14 Origin： Remark：0 Click：
Inventory AMS 5590 Specifications, Suppliers AMS 5590 Datasheet, AMS 5590 Stocklist Steel -melting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
MATERIAL SPECIFICATIONS DATASHEET - Grade AMS 5590
Material Category - Aerospace Material Steel Series
Techncial Specifications - AMS 5590F
HS Code for Customs - 72221100 / 72221900 / 72223000
Techncial Specifications - AMS 5590F
HS Code for Customs - 72221100 / 72221900 / 72223000
Official Test Report - issued by TUV - SGS - BV
Chemical compositions (Mass weight %)
Chemical compositions (Mass weight %)
C (％): ≤ 0.08
Si (％): ≤ 0.35
Mn (％): ≤ 0.35
P (％) ≤: 0.015
S (％) ≤: 0.015
Cr (％): 17.0 ~ 21.0
Co (%): ≤ 1.00
Mo (％): 2.80 ~ 3.30
Nb/Ta (％): 4.75 ~ 5.50
Ti (%): 0.65 ~ 1.15
Al (%): 0.20 ~ 0.80
B (%): ≤ 0.006
Fe (%): Remainder
Si (％): ≤ 0.35
Mn (％): ≤ 0.35
P (％) ≤: 0.015
S (％) ≤: 0.015
Cr (％): 17.0 ~ 21.0
Co (%): ≤ 1.00
Mo (％): 2.80 ~ 3.30
Nb/Ta (％): 4.75 ~ 5.50
Ti (%): 0.65 ~ 1.15
Al (%): 0.20 ~ 0.80
B (%): ≤ 0.006
Fe (%): Remainder
Cu (%): ≤ 0.30
Ni (%): 50.0 ~ 55.0
Ta (%): -
Ni (%): 50.0 ~ 55.0
Ta (%): -
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Bars, plate, tubings and forgings
Form: Bars, plate, tubings and forgings
Heat treatment condition: solution annealing 1066 Deg.C treated
Tensile strength, σb/MPa: 1000
Yield strength, σ0.2/MPa: 586
Elongation, δ(％): 30.0
Reduction of area, ф (％): -
Elongation, δ(％): 30.0
Reduction of area, ф (％): -
Hardness | HRW: -
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD, VOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 400mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 300mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD, VOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 400mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 300mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Previous page：F44
Last page：ASTM A1021 Grade F
