AMS 5829 Stockist, AMS 5829 Equivalent Datasheet
Home > Superalloy > Text

AMS 5829
2014-11-15 14:52:12   Origin:   Remark:0 Click:

Specifications AMS 5829 datasheet, AMS 5829 Chemical, AMS 5829 properties from steelmaking, hot forging, hot rolling, heat treatment,cold working.We also possess advanced precision machining equipments for further processing.
MATERIAL CATEGORY - Nickel-Chromium-Cobalt alloy
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
Wrought Ni-Cr alloy strengthened by the addition of Ti and Al. Age hardenable and creep-resistant alloy for service at temperatures to 920°C.

Density 8.18 gm/cc

Melting point: 1370 °C

MATERIAL SPECIFICATIONS - Alloy 90, Udimet 90, UNS N07090, EN 2400
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
Round bar / flat bar / steel strip / square bar / valve body / ring / plate
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft

Gas turbine engineering
Automobile exhaust valves
Die-casting inserts and cores
Nuclear boiler tube parts.
Landing and takeoff gear
Missile and ejector systems
Torsion springs
Round bar / Wire rod (Diameter): 5.5mm to 400mm
Square bar / Flat bar: 3mm to 1000mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 450mm X W100 - 1000mm X L1000 - 12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: 

Hot search:AMS 5829

Previous page:Nimonic 90
Last page:Udimet 90

Share to: