S20100 Stockist, S20100 Equivalent Steel

S20100
2014-09-09 13:55:35   Origin:   Remark:0 Click:

Specifications S20100 Ex-stock,S20100 Suppliers, Properties S20100 Forging Bar Plate, S20100 Technical Specifications Melting, ESR & VAR technique, Hot blooming, Hot forging, Hot rolling, Heat treatment, Straightening, Ultrasonic flaw detection test.

 

MATERIAL TECHNICAL DATA SHEET - S20100
CATEGORY - 17Cr-4Ni Austenitic steel
TYPICAL APPLICATIONS  
Chemical equipment
Mechanical parts used in the condition of corrosion resistance 
Bolt and nut
PRODUCT DESCRIPTION
The alloy is usually produced by AOD followed by electroslag refining (ESR).
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the softened condition.
Final heat treatment - solution treatment. 
MATERIAL SPECIFICATIONS
ASTM A959 (2004), A276
AVAILABILITY  
Black, Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft, flat bar
CHEMICAL COMPOSITION (WEIGHT %)
C (%):     ≤ 0.15
Si (%):    ≤ 1.00
Mn (%):   5.50 ~ 7.50
P (%)≤:   0.060
S (%)≤:   0.030
Cr (%):    16.0 ~ 18.0
Ni (%):    3.50 ~ 5.50
Mo (%):    —
Other (%): N ≤0.25
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb/≥MPa: 655
Yield strength, σ0.2/≥MPa: 310
Elongation, δ (%)≥: 40
Reducrtion of area, ф (%)≥:  -
Hardness ≤(HBW): 241
Hardness | ≤HRB:  100
Cold bending property: N
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to email or call our resident team of qualified production engineers, Email: sales@ccsteels.com  
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 1000mm
Plate / Sheet steel / Steel strip: 0.1mm to 1200mm
Width: 8mm to 1200mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.

Hot search:S20100

Previous page:ASTM 201
Last page:ASTM 201L

Share to: