X10CrNiW17-13-3
2024-11-11 14:33:00 Origin： Remark：0 Click：
X10CrNiW17-13-3 is a Chromium - Nickel - Tungsten base austenitic steel, 1.4962 from Steelmaking, ESR melting, Plate, Sheet, Round bar technical specifications - NF A36-209
TECHNICAL DATA SHEET - X10CrNiW17-13-3
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY - Austenitic Stainless Steel
CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (％): 0.08 ~ 0.15
Silicon, Si (％): ≤ 0.80
MATERIAL CATEGORY - Austenitic Stainless Steel
CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (％): 0.08 ~ 0.15
Silicon, Si (％): ≤ 0.80
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.035
Sulfur, S (％) ≤: 0.005
Chromium, Cr (％): 15.5 ~ 17.5
Phosphorus, P (％) ≤: 0.035
Sulfur, S (％) ≤: 0.005
Chromium, Cr (％): 15.5 ~ 17.5
Molybdenum, Mo (％): ≤ 0.50
Nickel, Ni (%): 13.0 ~ 14.5
Copper, Cu (%): ≤ 0.30
Tungsten, W (%): 2.50 ~ 3.00
Boron, B (%): ≤ 0.006
Vanadium, V (%): ≤ 0.10
Titanium, Ti (%): 5 X C ~ 0.85
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, Rm ≥ MPa: 590
Yield strength, Rp0.2 ≥ MPa: 440 ~ 650
Elongation, A5 ≥ (％): 20.0
Yield strength, Rp0.2 ≥ MPa: 440 ~ 650
Elongation, A5 ≥ (％): 20.0
Reduction of area, Z (%): -
QT hardness, HBW ≤: 180 ~ 240
PRODUCT DESCRIPTION
The alloy is usually produced by BEF + AOD + VD / AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment
The alloy is usually produced by BEF + AOD + VD / AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment
ADVANTAGED STOCK
AISI 690 /Refractaloy 26, ASTM A565 Grade 616 /422SS /S42200, Grade 615 /S41800, XM-32 /S64152, PH13-8 /XM-13 /S13800
FV520B /1.4594, PH15-7Mo /632 (S15700), 15-5PH /XM-12 (S15500), 17-4PH /630 /1.4542, 17-7PH /631 (S17700),
851, 961, WB36, D6-AC, D6A. A-286 /ASTM 660, AM-350 /633 (S35000), AM-355 /634 (S35500), Custom 450 /XM-25 (S45000)
1.4980, X22CrMoV12-1 /1.4923, 1.4935, 1.4938, 1.4913
Forms: Bars, Forge piece, Ring, Strip
Non-magnetic alloy
X40MnCrN19/1.3813, X8CrMnN18-18/1.3816, X40MnCr18/1.3817, N1310, X55CrMnN18-4, X50MnCrV20-14, X5MnCrNiN18-13
DIN 1.3964, DIN 1.3974, 23-8N /Nitronic 20,
Forms: Bars, Forge piece, Ring.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, you can EMAIL our qualified production engineers, Email us: sales@ccsteels.com
If you meet further on any technical enquiry, you can EMAIL our qualified production engineers, Email us: sales@ccsteels.com
Hot search：X10CrNiW17-13-3
Previous page：Z4CMN18-08Az
Last page：St T17/13W
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1