1.4507
2014-12-01 14:06:34 Origin： Remark：0 Click：
DIN EN 10088-1 Duplex stainless steel 1.4507 Round bar, Flat bar, Plate and forgings 1.4507 Hot forging, Hot rolling, Heat treatment, Cold working or Machined.
TECHNICAL DATA SHEET - W-Nr 1.4507
MATERIAL CATEGORY: Austenitic-ferritic corrosion resisting steels
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
MATERIAL SPECIFICATIONS - DIN 17445, 17440, DIN EN 10088-1, 10297,10272,10312, DIN EN 10088-5
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.030
Silicon, Si (％): ≤ 0.70
Manganese, Mn (％): ≤ 2.00
Phosphorus, P (％)≤: 0.035
Sulfur, S (％)≤: 0.015
Chromium, Cr (％): 24.0 ~ 26.0
Silicon, Si (％): ≤ 0.70
Manganese, Mn (％): ≤ 2.00
Phosphorus, P (％)≤: 0.035
Sulfur, S (％)≤: 0.015
Chromium, Cr (％): 24.0 ~ 26.0
Nickel, Ni (％): 5.50 ~ 7.50
Molybdenum, Mo (％): 2.70 ~ 4.00
Nitrogen, N (％): 0.15 ~ 0.30
Molybdenum, Mo (％): 2.70 ~ 4.00
Nitrogen, N (％): 0.15 ~ 0.30
Copper, Cu (%): 1.00 ~ 2.50
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Condition: quenching
Thickness/mm:-
Tensile strength, σb/MPa: 490~740
Yield strength, σ0.2≥/MPa: 225
Elongation, δ5≥(％): 40.0
Reduction of area, ψ≥(％): -
Impact strength, Akv≥/J: 120
Yield strength, σ0.2≥/MPa: 225
Elongation, δ5≥(％): 40.0
Reduction of area, ψ≥(％): -
Impact strength, Akv≥/J: 120
Hardness HBS30: 130 ~ 190
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
PRODUCT PROFILE & DIMENSIONS
Round bar / Disc (diameter): 5.5mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Round bar / Disc (diameter): 5.5mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 540mm X W50 - 1200mm X L1000 - 5000mm
Heavy/middle plate via hot rolled: T60 - 540mm X W50 - 1200mm X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 6mm X W100 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Hot search：1.4507
Previous page：X2CrNiMoCuN25-6-3
Last page：X3CrTi17
