1.4562 /DIN X1NiCrMoCu32-28-7
2026-02-25 16:25:00 Origin： Remark：0 Click：
Technical specifications of DIN 1.4562 austenitic corrosion resisting steels available forms round bar, flat bar, strip, sheet, plate via hot rolled, forged, and final heat treated
TECHNICAL DATA SHEET - X1NiCrMoCu32-28-7 & 1.4562
MATERIAL CATEGORY: austenitic corrosion resisting steel
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by AOD / VOD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
MATERIAL SPECIFICATIONS - DIN 17445,17440, DIN EN 10088-1, 10297,10272,10312
CHEMICAL COMPOSITION (WEIGHT %)
Carbon, C (％): ≤ 0.015
Silicon, Si (％) ≤: 0.30
Manganese, Mn (％) ≤: 2.00
Phosphorus, P (％): ≤ 0.020
Sulfur, S (％): ≤ 0.010
Chromium, Cr (％): 26.0 ~ 28.0
Nickel, Ni (％): 30.0 ~ 32.0
Molybdenum, Mo (％): 6.00 ~ 7.00
Others (％): Copper 1.00 ~ 1.40, Nitrogen 0.15 ~ 0.25
Silicon, Si (％) ≤: 0.30
Manganese, Mn (％) ≤: 2.00
Phosphorus, P (％): ≤ 0.020
Sulfur, S (％): ≤ 0.010
Chromium, Cr (％): 26.0 ~ 28.0
Nickel, Ni (％): 30.0 ~ 32.0
Molybdenum, Mo (％): 6.00 ~ 7.00
Others (％): Copper 1.00 ~ 1.40, Nitrogen 0.15 ~ 0.25
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Condition: quenched
Thickness/mm: -
Tensile strength, σb / MPa: 650~850
Yield strength, σ0.2 ≥ MPa: 280
Elongation, δ5 ≥ (％): 40
Reduction of area, ψ ≥ (％): -
Impact strength, Akv ≥ J: 120
Yield strength, σ0.2 ≥ MPa: 280
Elongation, δ5 ≥ (％): 40
Reduction of area, ψ ≥ (％): -
Impact strength, Akv ≥ J: 120
Hardness HBS30: -
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Medical equipment
Chemical equipments
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
PRODUCT PROFILE & DIMENSIONS
Round bar / rod / disc (Diameter): 6.0 to 800 mm
Square bar / flat bar: 10 to 600 mm
Round bar / rod / disc (Diameter): 6.0 to 800 mm
Square bar / flat bar: 10 to 600 mm
Length: random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 ~ 200 X W20 ~ 1500 X L1000 ~ 12000 mm
Heavy/middle plate via hot rolled: T6 ~ 200 X W20 ~ 1500 X L1000 ~ 12000 mm
Sheet steel via cold rolled: T0.5 ~ 6 X W15 ~ 1000 X L1000 ~ 2000 mm
Steel strip via cold rolled: T0.3 ~ 3 X W5 ~ 200 X L (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
Hot search：1.4562 /DIN X1NiCrMoCu32-28-7
Previous page：DIN X1NiCrMoCu32-28-7
Last page：X1NiCrMoCuN31-27-4
Total list
Monthly rank
- 21ASTM A565 type 616HT
- 18X8CrMnN20-10
- 142Cr11NiMoNbVN
- 13AM-350
- 13X66Cr13
- 13ASTM A693 Gr. XM-16
- 13SUH310
- 13S42035
- 132Cr20Mn9Ni2Si2N
- 12STS321