X5MnCrNiN18-13
2026-02-05 08:36:00 Origin： Remark：0 Click：
X5MnCrNiN18-13, a 13% Chromium - 18% Manganese base austenitic steel, 1.3949 round bar, hollow bar, flat Bar, ESR, hot forged / rolled, heat treated, cold worked
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
NONMAGNETIC ALLOY STEEL - X5MnCrNiN18-13
Material category: non-magnetic stainless steel and alloy
Mateiral techincal specifications: DIN SEW 390 (1991)
Typical chemical compositions (mass fraction %)
Carbon, C (％): ≤ 0.08
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 17.0 ~ 19.0
Phosphorus, P (％) ≤: 0.060
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 12.0 ~ 14.0
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 17.0 ~ 19.0
Phosphorus, P (％) ≤: 0.060
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 12.0 ~ 14.0
Nickel, Ni (％): 1.50 ~ 3.00
Molybdenum, Mo (％): 0.20 ~ 0.80
Molybdenum, Mo (％): 0.20 ~ 0.80
Nitrogen, N (%): 0.10 ~ 0.35
Niobium, Nb (％): ≤ 0.25
Niobium, Nb (％): ≤ 0.25
HOT WORKING, HEAT TREATMENT AND MECHANICAL PROPERTIES
Hot working temperature: 1150 ~ 950℃
Quenching or solution treatment temperature: 1000 ~ 1100℃
Tensile strength, Rm ≥ MPa: 650 ~ 850
Yield strength, Rp0.2 ≥ MPa: 320
Elongation, A5 ≥ (％): 40.0
Yield strength, Rp0.2 ≥ MPa: 320
Elongation, A5 ≥ (％): 40.0
Impact, Akv ≥ J: 85 (transversal value)
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the annealed condition.
Final heat treatment - solution treatment
The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the annealed condition.
Final heat treatment - solution treatment
AVAILABLE FORMS AND DIMENSION
Round bar / rod / disc (diameter): 6.0 to 850 mm
Square bar / flat bar: 10 to 600 mm
Length: random length or based on the customer's special requirement.
Round bar / rod / disc (diameter): 6.0 to 850 mm
Square bar / flat bar: 10 to 600 mm
Length: random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T10 ~ 400 X W15 ~ 800 X L1000 ~ 5000 mm
Hollow bar / tubing: THK10 ~ 300 X OD 80 ~ 1200mm
Forging piece: stepped shafts, other different shapes based on OEM.
Hollow bar / tubing: THK10 ~ 300 X OD 80 ~ 1200mm
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Hot search：X5MnCrNiN18-13
