S21400
2014-09-18 17:15:31 Origin： Remark：0 Click：
Description S21400 Ex-stock, Flat bar S21400 Inventory, Forgings S21400 Properties Steelmaking, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - Grade UNS S21400
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Cr - Mn base austenitic stainless
CHEMICAL COMPOSITION (Mass weight - %)
C (％): ≤ 0.12
Si (％): 0.30 ~ 1.00
Mn (％): 14.5 ~ 16.0
P (％)≤: 0.045
S (％)≤: 0.030
Cr (％): 17.0 ~ 18.5
Ni (％): ≤ 1.00
Mo (％): -
N ％): ≥ 0.35
Si (％): 0.30 ~ 1.00
Mn (％): 14.5 ~ 16.0
P (％)≤: 0.045
S (％)≤: 0.030
Cr (％): 17.0 ~ 18.5
Ni (％): ≤ 1.00
Mo (％): -
N ％): ≥ 0.35
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 690
Yield strength, σ0.2/MPa: 380
Elongation, δ ≥(％): 35.0
Reduction of area, ф ≥ (％): 55
Hardness via heat treatment /HBW: -
Reduction of area, ф ≥ (％): 55
Hardness via heat treatment /HBW: -
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment / QT.
TYPICAL APPLICATIONS
Chemical equipment.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nut.
Pressure vessel.
AVAILABLE FORMS AND DIMENSIONS
Round bar (Diameter): 5.5 ~ 450mm
Square bar / Flat bar: 3 ~ 350mm
AVAILABLE FORMS AND DIMENSIONS
Round bar (Diameter): 5.5 ~ 450mm
Square bar / Flat bar: 3 ~ 350mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 ~ 3mm X W5 ~ 650mm X L (or in coil form).
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.1 ~ 3mm X W5 ~ 650mm X L (or in coil form).
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
Hot search：S21400
