E-Brite 26-1 Stockist, E-Brite 26-1 Equivalent Steel

E-Brite 26-1
2015-09-29 09:58:47   Origin:   Remark:0 Click:

Material Specification Ferritic Chromium Steel E-Brite 26-1 round bar, wire rod, S44627 Plate ESR, hot forging, Rolling, Heat treatment, Straightened, Ultrasonic test, Cold working, Machined.

TECHNICAL DATASHEET -  ASTM E-Brite 26-1 & S44627

OFFICIAL TEST CERTIFICATE: issued by TUV - SGS -  BV
MATERIAL CATEGORY: Ferritic chromium
stainless steel
TECHNICAL SPECIFICATIONS : ASTM A176, A240
CHEMICAL COMPOSITION (mass weight %)
Carbon, C (%):   ≤ 0.010
Silicon, Si (%):   ≤ 1.00
Manganese, Mn (%):  ≤ 0.40
Phosphorus, P (%)≤:  0.020
Sulfur, S (%)≤:  0.020
Chromium, Cr (%):  25.0 ~ 27.5
Nickel, Ni (%):  ≤ 0.50
Molybdenum, Mo (%):  0.75 ~ 1.50
Nitrogen, N (%):  0.015 max.
Other (%): Nb 0.05 ~ 0.20, Cu  ≤ 0.20, Nb+Cu ≤ 0.50
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb/MPa:  450 min.
Yield strength, σ0.2/MPa: 275 min.
Elongation, δ (%): 22 min.
Reduction of area, ф (%):       -
Hardness (HBW): ≤ 90
APPLICATION FIELD
Flue gas desulfurization scrubbers, Food processing equipment.
Heat exchangers, Hydrometallurgy, Oil and gas production equipments.
Pulp mill bleach systems, Seawater handling equipment, Tall oil distillation columns and equipment.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.

PRODUCT DESCRIPTION
The alloy is usually produced by AOD / BEF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
Heavy/middle plate via hot rolled: T60 - 400mm X W100 ~ 1200mm X L1000 ~ 3000mm
Sheet steel via cold rolled: T1.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.5 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.

Hot search:E-Brite 26-1

Previous page:XM-27 / E-Brite 26-1
Last page:7-Mo Plus

Share to: