TrimRite / S42010
2025-10-28 07:19:00 Origin： Remark：0 Click：
Specifications TrimRite technical datasheet, round bar, flat bar, plate TrimRite Chemical, Stocklist TrimRite properties from steelmaking, ESR melted, hot bloomed, forged
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL DATA SHEET - TrimRite & S42010
Material category - martensitic stainless steel
Technical standards: nonstandards frequently-used alloy
Typical chemical compositions ( mass weight % )
Carbon, C (％): 0.15 ~ 0.30
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％): ≤ 0.040
Sulfur, S (％): ≤ 0.030
Chromium, Cr (％): 13.5 ~ 15.0
Nickel, Ni (％): 0.25 ~ 1.00
Molybdenum, Mo (％): 0.40 ~ 1.00
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％): ≤ 0.040
Sulfur, S (％): ≤ 0.030
Chromium, Cr (％): 13.5 ~ 15.0
Nickel, Ni (％): 0.25 ~ 1.00
Molybdenum, Mo (％): 0.40 ~ 1.00
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Modulus of Elasticity: 204~215 GPa
Tensile strength, σb / MPa: 690 ~ 725
Yield strength, σ0.2 / MPa: -
Elongation, δ5 (％): -
Elongation, δ5 (％): -
Reduction of area, ф (％): -
Hardness | HRB: -
APPLICATION FIELD
Food processing equipment
Hydrometallurgy, heat exchangers
Oil and gas production equipment
Pulp mill bleach systems
Seawater handling equipment
Tall oil distillation columns and equipment
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Previous page：38C2
Last page：Greek Ascoloy / S41800
