2016-04-29 20:47:11 Origin： Remark：0 Click：
MATERIAL CATEGORY: Non-magnetic stainless steel
Si (％): ≤ 1.00
Mn (％): 17.5 ~ 20.0
P (％)≤: 0.060
S (％)≤: 0.030
Cr (％): 17.5 ~ 20.0
Mo (％): -
N (％): 0.40 ~ 0.70
Yield strength, σ0.2 ≥/MPa: 480
Elongation, δ≥(％): 40.0
Impact at RM temp. Akv ≥/J: 200 (transversal value)
The alloy is usually produced by BEF AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution + ageing treatment
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
PRODUCT PROFILE & DIMENSIONS
Round bar (Diameter): 5.5 to 550mm
Square bar / Flat bar: 10mm to 500mm
Forged retaining ring: OD200 ~ 1220 X ID100 ~ 1000 X H100 ~ 800mm
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: firstname.lastname@example.org