X11CrMo12-1 Stockist, X11CrMo12-1 Equivalent Steel

X11CrMo12-1
2019-09-17 09:10:00   Origin:   Remark:0 Click:

Specifications X11CrMo12-1 Datasheet, Stocklist X11CrMo12-1 Chemical, Suppliers X11CrMo12-1 mechanical property from Steelmaking, ESR melting, Hot blooming, 100%UT, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or Machined. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.

TECHNICAL DATA SHEET - Grade X11CrMo12-1


OFFICIAL TEST CERTIFICATE: issued by TUV - SGS BV
MATERIAL CATEGORY - Turbine blade alloy steel 
CHEMICAL COMPOSITION (WEIGHT %)
C (%):     0.08 ~ 0.15
Si (%):     ≤ 0.60
Mn (%):   0.40 ~  1.00
P (%)≤:   0.025
S (%)≤:   0.015
Cr (%):    11.5 ~ 13.0
Ni (%):     ≤ 0.60
Mo (%):   0.40 ~ 0.80
MECHANICAL PROPERTIES UNDER ROOM TEMP.  
Condition of heat treatment: Quenched and tempered
Tensile strength, σb ≥/MPa: 680 ~ 880
Yield strength, σ0.2 ≥/MPa: 490
Elontation, δ ≥(%): 20.0
Reduction of area, ф ≥(%): 60.0
Hardness | HBW: 201 min.
Impact AKV: 82J (60Ft-Lbs) min.
PRODUCT DESCRIPTION
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
FORMS AND DIMENSIONS
Round bar (Diameter): 5.5 ~ 550mm
Square bar / Flat bar: 3 ~ 650mm
Wire rod (Diameter): 5.0 ~ 12mm
Steel strip via cold rolled: T0.3 ~ 3mm X W5 ~ 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us:
sales@ccsteels.com.

Hot search:X11CrMo12-1

Previous page:ASTM A182 Grade F3V
Last page:N06686

Share to: