Z5NCTDV26-15B
2017-06-09 11:52:46 Origin： Remark：0 Click：
Specifications Z5NCTDV26-15B datasheet, Z5NCTDV26-15B Chemical,Z5NCTDV26-15B properties from Steelmaking, ESR melted, Hot blooming, 100% UT, Hot forging, Hot roll, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or Machined. Technical specifications - NF A35-578 1991. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATASHEET - NF Z5NCTDV26-15B
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Heat resistant Steel
Technical standards: NF A35-578 - 1991
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.05
Si (％): ≤ 0.50
Mn (％): ≤ 2.00
P (％)≤: 0.020
S (％)≤: 0.010
Cr (％): 13.5 ~ 16.0
Ni (%): 24.0 ~ 27.0
Mo (％): 1.00 ~ 1.50
MATERIAL CATEGORY: Heat resistant Steel
Technical standards: NF A35-578 - 1991
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.05
Si (％): ≤ 0.50
Mn (％): ≤ 2.00
P (％)≤: 0.020
S (％)≤: 0.010
Cr (％): 13.5 ~ 16.0
Ni (%): 24.0 ~ 27.0
Mo (％): 1.00 ~ 1.50
Ti (%): 1.90 ~ 2.30
B (%): 0.005 ~ 0.008
Al (%): ≤ 0.35
V (%): 0.10 ~ 0.50
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength,σb/≥ MPa: 930
Yield strength, σ0.2/≥ MPa: 635
Elongation, δ ≥(％): 12.0
Yield strength, σ0.2/≥ MPa: 635
Elongation, δ ≥(％): 12.0
hardness / HBW: -
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the annealed condition.
Final heat treatment - solution treatment
PRODUCT PROFILE & AVAILABLE FORMS
The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the annealed condition.
Final heat treatment - solution treatment
PRODUCT PROFILE & AVAILABLE FORMS
Round bar (Diameter): 5.5 to 600mm
Square bar / Flat bar: T3 to 500mm X W10 ~ 1200mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T50 - 400mm X W50 - 1000mm X L1000 - 2000mm
Sheet steel via cold rolled: T0.5 - 3mm X W100 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 600mm X L (or in coil form)
Square bar / Flat bar: T3 to 500mm X W10 ~ 1200mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T50 - 400mm X W50 - 1000mm X L1000 - 2000mm
Sheet steel via cold rolled: T0.5 - 3mm X W100 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 600mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, you can do as follows:
EMAIL our qualified production engineers, E-mail: lh.steel@hotmail.com
Reach to our sales department directly: sales@ccsteels.com
Hot search：Z5NCTDV26-15B
